IBM IntelliStation - ps-2

Updated 07/01/03
Bay Form Factor Height Front Access Usage
1, 2 1
HS SL Yes open
3 133mm (5.25in) SL 2
Yes FDD
4 133mm (5.25in) SL3 Yes CD-ROM
1. HDD bays in the secondary server in 16-way configurations do not support boot disks.
2. Supports FDD, high-density FDD, CD-ROM, CD-RW or DVD-ROM. If an IDE device (optical drive) is installed, must be configured as
slave.
3. Supports CD-ROM, CD-RW or DVD-ROM. Must be configured as master if bay three contains an optical drive. If only one optical
drive is installed, it must be installed in bay four. In 16-way configurations, bays three and four are disabled in the secondary chassis.
Bay 1
Bay 3
Location of PCI slots and RIO ports
on rear of x440 chassis
Slot 1: Bus A, 66MHz, 64-bit, full-length, 3.3v
Slot 2: Bus A, 66MHz, 64-bit, full-length, 3.3v
Slot 3: Bus B, 100MHz, 64-bit, full-length, 3.3v
Slot 4: Bus B, 100MHz, 64-bit, full-length, 3.3v
Slot 5: Bus C, 133MHz, 64-bit, full-length, 3.3v
Slot 6: Bus D, 133MHz, 64-bit, full-length, 3.3v
xSeries 440 front view
Bay 2
Bay 4
xSeries 440 I/O Options
RIO ports
Optimal order of installation (highest frequency adapters first): 6-5-4-2-3-1
Scan sequence (up to eight-way):
Inside the server: slots 1, 2, 6, 5, 3, 4
Continuing in an RXE-100: slots 11, 12, 9, 10, 7, 8, 17, 18, 15, 16, 13, 14.
Scan sequence (16-way):
Inside the primary server: slots 1, 2, 3, 4, 5, 6
Standard 6-slot Expansion Kit in the RXE-100: slots 7, 8, 9, 10, 11, 12
Inside the secondary server: slots 13, 14, 15, 16, 17, 18
Second 6-slot Expansion Kit in the RXE-100: slots 19, 20, 21, 22, 23, 24
B
1 2 3 4 5 6
For the latest product & technical information, refer to the Information Sources on pages 2 & 3.
A
119
IBM xSeries 440