IBM IntelliStation - ps-2

68
Bay Form Factor Height Front Access Usage
- 89mm (3.5in) SL Yes FDD
RM A 133mm (5.25in) HH Yes CD-ROM
RM B 133mm (5.25in) HH1 Yes Open
RM C 133mm (5.25in) HH1 Yes Open
(1 ... 12) 2 HS SL Yes Open
1. Two half-high (HH) bays can be combined to support a single full-high (FH) device
2. Optional 6-pack Ultra320 Hot-swap Expansion Kit (P/N 32P8163) is required to support bays seven through 12.
Note: Install HDDs in the same order as bays are numbered, i.e., bays one to 12.
x255 front view
1 2 3 4 5 6
7 8 9 10 11 12
xSeries 255 I/O Options
slot 1
slot 2
x255 rear view
slot 3
slot 4
slot 5
slot 6
slot 7
FDD
RM A:
CD-ROM
RM B
RM C
External VHDCI
SCSI port
Slot 1: Bus A, 33MHz, 32-bit, 5v, full-length
Slot 2: Bus B, 100MHz, 64-bit, 3.3v, full-length, Active PCI-X
Slot 3: Bus B, 100MHz, 64-bit, 3.3v, full-length, Active PCI-X
Slot 4: Bus C, 100MHz, 64-bit, 3.3v, full-length, Active PCI-X
Slot 5: Bus C, 100MHz, 64-bit, 3.3v, full-length, Active PCI-X
Slot 6: Bus D, 100MHz, 64-bit, 3.3v, full-length, Active PCI-X
Slot 7: Bus D, 100MHz, 64-bit, 3.3v, full-length, Active PCI-X