IBM IntelliStation - ps-2

118
Part
Number
Total
Internal
Storage 1
xSeries 440 Hard Disk Drive (HDD) Storage
18.2GB
(06P5754)
10,000rpm HDDs 15,000rpm HDDs
36.4GB
(06P5755)
73.4GB
(06P5756)
18.2GB
(06P5767)
36.4GB
(06P5768)
0GB Standard on base models
18.2GB 1 - - 1 -
36.4GB 2 1 - 2 1
72.8GB - 2 - - 2
73.4GB - - 1 - -
146.8GB (max) - - 2 - -
This table does not represent all possible HDD configurations. Total internal storage listed is within +/-0.2GB unless
otherwise noted.
1. Select a total storage row then select the quantity of HDDs from a column corresponding to the HDD of choice.
Description RPM Height
Bays
Supported 1
Maximum
Quantity
06P5754
Hot-swap Ultra160 SCSI HDDs
18.2GB 10Krpm Ultra160 SCSI Hot-swap SL HDD 10000 SL 1, 2 2
06P5755 36.4GB 10Krpm Ultra160 SCSI Hot-swap SL HDD 10000 SL 1, 2 2
06P5756 73.4GB 10Krpm Ultra160 SCSI Hot-swap SL HDD 10000 SL 1, 2 2
06P5767 18.2GB 15Krpm Ultra160 SCSI Hot-swap SL HDD 15000 SL 1, 2 2
06P5768 36.4GB 15Krpm Ultra160 SCSI Hot-swap SL HDD 15000 SL 1, 2 2
Removable Media2 Bays
Supported
08K9603 ThinkPad Removable Diskette Drive 3
3
05K9233 ThinkPad 24x-10x CD-ROM Ultrabay 2000 Drive 4
3, 4
22P9102 ThinkPad Ultralight 8x Max DVD-ROM Ultrabay 2000 Drive5 3, 4
External Storage Expansion Units6 Form Factor
35311RU EXP300 Storage Expansion Unit 7
Rack (3U)
17401RU FAStT EXP700 Storage Expansion Unit8 Rack (3U)
172260U FAStT600 Storage Server (US line cord, English pubs) 9
Rack (3U)
35601RU FAStT EXP500 Storage Expansion Unit10 Rack (3U)
35421RU FAStT200 Storage Server11, 12 Rack (3U)
35422RU FAStT200 HA Storage Server11 Rack (3U)
19K1121 FAStT200 Redundant RAID Controller -
1. HDD bays in the secondary server in 16-way configurations do not support boot disks.
2. Removable media bays in the secondary server in 16-way configurations are disabled.
3. Installed standard in bay 3. Not compatible with bay four.
4. Installed standard in bay four.
5. Install in either bay three or four, requring removal of standard devices. If only one optical drive is installed, it must be installed in bay four. If a second optical drive is installed, use bay
three configured as slave.
6. Not supported by the onboard external SCSI port, which supports external tape enclosures only. External SCSI HDD storage requires a RAID controller. Fibre Channel HDD storage
requires a Fibre Channel controller. For HDD expansion unit options, see the specific expansion unit section. For Fibre Channel storage devices, refer to the Fibre Channel Solutions
Overview section.
7. EXP300 includes a single 2M Ultra2 SCSI cable and dual hot-swap 500W redundant power supplies, each with its own power cord.
8. FAStT EXP700 Storage Expansion Unit (P/N 17401RU) includes dual hot-swap 400w power supplies, each with its own power cord.
9. FAStT600 Storage Server includes two 390w auto-ranging redundant power supplies, each with its own power cord.
10. FAStT EXP500 Storage Expansion Unit (P/N 35601RU) includes dual hot-swap 350W power supplies, each with its own power cord.
11. The FAStT200 includes two hot-swap, 350W auto-ranging redundant power supplies, each with its own power cord.
12. Can be upgraded to FAStT200 HA Storage Server through the addition of a FAStT200 Redundant RAID Controller (P/N 19K1121).