IBM IntelliStation - ps-2

90
Part
Number
00N7991
Tape Drives
20/40 GB DDS/4 4mm Internal Tape
Drive
xSeries 335 Tape Options
Bays
Supported 1
SCSI
Interface
(bit)
- 16 Ultra2 LVD
Form Factor Termination
Included
89mm (3.5in) HH or
133mm (5.25in) HH
Y 2
Ext Tape
Enclosures 1
00N8016 100/200GB LTO Tape Drive - 16 Ultra2 LVD 133mm (5.25in) FH Y 2
3503B1X
24P2396 100/200GB LTO Half-High Tape Drive 5
- 16 Ultra2 LVD 133mm (5.25in) HH Y 2
-
24P2398
40/80GB Half-High DLTVS Internal SCSI Tape
Drive
- 16 Ultra2 LVD 133mm (5.25in) HH Y 2
59P6736 160/320GB SDLT Tape Drive - 16 Ultra2 LVD 133mm (5.25in) FH Y 2 3503B1X
0034B0X
59P6744 LTO FH Generation-2 Tape Drive Option - 16 Ultra2 LVD 133mm (5.25in) FH Y 2 3503B1X
0034B0X
59P6746 VXA-2 80/160GB Tape Drive - 16 Ultra2 LVD 133mm (5.25in) HH Y2 Tape Autoloaders
0034B0X
00N7992 120/240GB DDS/4 Tape Autoloader - 16 Ultra2 LVD 133mm (5.25in) FH Y 2
3503B1X
360716X
3607 Series 1760GB/3.5TB SDLTpro Tape
Autoloader
- 16 Ultra2 LVD 2U Rack Y -
360726X 3607 Series 1.6TB/3.2TB LTO Tape Autoloader
External Tape Enclosures
- 16 Ultra2 LVD 2U Rack Y -
0034B0X NetBAY Tape Enclosure (Rack Mount) 3
- 16 Ultra2 LVD 4U Rack N -
3503B1X Full-High SCSI Tape Enclosure 4
- 16 Ultra2 LVD
Desktop or 3U
Rack
Y -
1. xSeries 335 does not support internal tape drives and does not include an external SCSI connector. An external tape library or internal tape drive with a tape enclosure, supported SCSI
adapter and appropriate cable must be selected. All tape drives and enclosures are supported by PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) or Single Channel Ultra320 SCSI Controller
(P/N 71P8594) which have an external 0.8mm VHDCI connector. Select tape drive, enclosure and supported adapter then use Appendix D: Cables - Storage Units - Controllers to select an
appropriate external cable.
2. Termination requires installing the 34in single-drop, terminated LVD SCSI cable provided with the option.
3. NetBAY Tape Enclosure (P/N 0034B0X) is a 4U rack-mounted enclosure that supports four full-high or six half-high tape drives. The backplate includes six 0.8mm VHDCI external
connectors for attachment of up to six servers. Internal connection of tape drives requires the single-drop terminated LVD SCSI cable that ships with the tape drive, which also provides
termination for the SCSI bus. A single 320w power supply with a low-voltage power cord is standard. An external SCSI storage cable is not provided. Refer to Appendix D: Cables - Storage
Units - Controllers to select a supported cable.
4. Black desktop or 3U rack tape enclosure supports a single 133mm (5.25in) full-high LVD tape device including DLT tape drives. Requires a fixed shelf if installed in a rack (allow additional
1U for fixed shelf). Includes a 90w power supply, cooling fan, external terminator, power cord (country-specific), and 2m 68-pin to 0.8mm external cable.
5. This tape drive must be shipped separately as an option and installed at a customer site. Factory or vendor installation prior to shipping is not supported.
Note: Additional tape attributes can be found in Appendix A: Tape Drive Attributes
-