IBM IntelliStation - ps-2

Part
Number
Updated 07/01/03
Tape Drives
xSeries 450 Tape Options
Bays
Supported 1
SCSI
Interface
(bit)
Form Factor Termination
Included
Ext Tape
Enclosures
59P6736 160/320GB SDLT Tape Drive - 16 Ultra2 LVD 133mm (5.25in) FH Y 2 0034B0X
3503B1X
59P6744 LTO FH Generation-2 Tape Drive Option - 16 Ultra2 LVD 133mm (5.25in) FH Y 2 Tape Autoloaders
0034B0X
3503B1X
360716X
3607 Series 1760GB/3.5TB SDLTpro Tape
Autoloader
- 16 Ultra2 LVD 2U Rack Y -
360726X 3607 Series 1.6TB/3.2TB LTO Tape Autoloader
External Tape Libraries
- 16 Ultra2 LVD 2U Rack Y -
3
4560SLX SDLT/LTO Modular Tape Library
External Tape Enclosures
- 16 Ultra2 LVD 5U Rack Y -
0034B0X NetBAY Tape Enclosure (Rack Mount) 4 - 16 Ultra2 LVD 4U Rack N -
3503B1X Full-High SCSI Tape Enclosure 5
- 16 Ultra2 LVD
Desktop or
3U Rack
Y -
1. IBM xSeries 450 does not support internal tape drives. An external tape library or tape enclosure must be used. All tape drives and enclosures are supported by PCI Wide Ultra160 SCSI
Adapter (P/N 19K4646) or Single Channel Ultra320 SCSI Controller (P/N 71P8594) which have an external 0.8mm VHDCI connector, or by the external channel of the integrated Ultra320 SCSI
controller (when available). Select tape drive, enclosure and controller then use Appendix D: Cables - Storage Units - Controllers to select an appropriate external cable.
2. Termination requires installing the 34in single-drop, terminated LVD SCSI cable provided with the option.
3. Tape library attributes and prerequisites are located in Appendix B: Tape Library Attributes.
4. NetBAY Tape Enclosure (P/N 0034B0X) is a 4U rack-mounted enclosure that supports four full-high or six half-high tape drives. The backplate includes six 0.8mm VHDCI external
connectors for attachment of up to six servers. Internal connection of tape drives requires the single-drop terminated LVD SCSI cable that ships with the tape drive, which also provides
termination for the SCSI bus. A single 320w power supply with a low-voltage power cord is standard. An external SCSI storage cable is not provided. Refer to Appendix D: Cables - Storage
Units - Controllers to select a supported cable.
5. Black desktop or 3U rack tape enclosure supports a single 133mm (5.25in) full-high LVD tape device including DLT tape drives. Requires a fixed shelf if installed in a rack (allow additional
1U for fixed shelf). Includes a 90w power supply, cooling fan, external terminator, power cord (country-specific), and 2m 68-pin to 0.8mm external cable.
Note: Additional tape attributes can be found in Appendix A: Tape Drive Attributes.
For the latest product & technical information, refer to the Information Sources on pages 2 & 3.
149
IBM xSeries 450