IBM IntelliStation - ps-2

Part
Number
Updated 07/01/03
Tape Drives
xSeries 235 Tape Options
Bays
Supported
SCSI
Interface
(bit)
00N7991 20/40GB DDS/4 4mm Internal Tape Drive 1 A, B 16 Ultra2 LVD
Form Factor Termination
Included
89mm (3.5in) HH or
133mm (5.25in) HH
Ext Tape
Enclosures
For the latest product & technical information, refer to the Information Sources on pages 2 & 3.
Y 2
3510020 3
0034B0X
00N8016 100/200GB LTO Tape Drive A+B 16 Ultra2 LVD 133mm (5.25in) FH Y 2 3503B1X
0034B0X
24P2396 100/200GB LTO Half-High Tape Drive 1, 9, 10 A, B 16 Ultra2 LVD 133mm (5.25in) HH Y2 35100203 0034B0X
24P2398
40/80GB Half-High DLTVS Internal SCSI Tape
Drive 1, 10 A, B 16 Ultra2 LVD 133mm (5.25in) HH Y2 35100203 0034B0X
59P6736 160/320GB SDLT Tape Drive A+B 16 Ultra2 LVD 133mm (5.25in) FH Y 2 3503B1X
0034B0X
59P6744 LTO FH Generation-2 Tape Drive Option A+B 16 Ultra2 LVD 133mm (5.25in) FH Y2 3503B1X
0034B0X
59P6746 VXA-2 80/160GB Tape Drive A, B 16 Ultra2 LVD 133mm (5.25in) HH Y2 35100203 Tape Autoloaders
0034B0X
00N7992 120/240GB DDS/4 Tape Autoloader A+B 16 Ultra2 LVD 133mm (5.25in) FH Y 2 3503B1X
0034B0X
360716X
3607 Series 1760GB/3.5TB SDLTpro Tape
Autoloader
- 16 Ultra2 LVD 2U Rack Y -
360726X 3607 Series 1.6TB/3.2TB LTO Tape Autoloader
External Tape Enclosures
- 16 Ultra2 LVD 2U Rack Y -
3510020 External Half-High SCSI Storage Enclosure5 - 16 LVD Desktop N -
3503B1X Full-High SCSI Tape Enclosure 6
- 16 Ultra2 LVD
Desktop or
3U Rack
Y -
0034B0X NetBAY Tape Enclosure (Rack Mount) 7
Associated Options
- 16 Ultra2 LVD 4U Rack N -
00N7956
68-pin External Multimode LVD/SE SCSI
Terminator
- 16 LVD/SE External Y 3510020
32P8164 External SCSI Interface Kit 8
- 16 LVD Internal N -
24P7973 Ultra320 External SCSI Connector Cable Option 8 - Ultra320 LVD Internal N -
Note: Optional External SCSI Interface Kit (P/N 32P8164) or Ultra320 External SCSI Connector Cable Option (P/N 24P7973) is required to enable the external 0.8mm VHDCI connector on the
rear of the chassis to support external tape enclosures. Attachment of internal media bay devices to one connector of the Ultra320 controller requires a supported terminated SCSI cable that
is provided with optional tape drives. If the hot-swap HDD backplane is connected to ServeRAID-4H, 4Mx or 4Lx, an internal tape drive can be connected to the integrated controller. If
ServeRAID-5i supports the internal HDD backplanes, some tape drives can be supported on channel B of the integrated controller (which is managed by the ServeRAID-5i adapter) if the bus
is designated as conventional SCSI during set-up and Microsoft Windows 2000 is installed. ServeRAID-5i supports the same tape drives in an external tape enclosure on the second channel
if the external SCSI port is enabled (the external port cannot be enabled if both channels of the integrated controller are connected internally). Optional PCI Wide Ultra160 SCSI Adapter (P/N
19K4646) or Single Channel Ultra320 SCSI Controller (P/N 71P8594) support external tape enclosures and internal tape drives.
1. Supported by ServeRAID-5i when installed on an internal bus connected to an integrated controller connector or in an external tape enclosure when connected to the second channel of
the integrated controller through the enabled external SCSI port.
2. Termination requires installing the 34in single-drop, terminated LVD SCSI cable provided with the option.
3. Requires 68-pin External Multimode LVD/SE SCSI terminator (P/N 00N7956).
4. If installed in a rack, a fixed shelf is required. Allow an additional 1U for the fixed shelf. One unit only per shelf is supported.
5. Black desktop tape enclosure that supports a single 133mm (5.25in) half-high (HH) tape drive. Internal and external connectors are 68-pin high-density supporting LVD. Requires 68-pin
External Multimode LVD/SE SCSI Terminator (P/N 00N7956). External cables are not included. Refer to Appendix D: Cables - Storage Units - Controllers to select a supported cable.
6. Black desktop or 3U rack tape enclosure supports a single 133mm (5.25in) full-high LVD tape device including DLT tape drives. Requires a fixed shelf if installed in a rack (allow additional
1U for fixed shelf). Includes a 90w power supply, cooling fan, external terminator, power cord (country-specific), and 2m 68-pin to 0.8mm external cable.
7. NetBAY Tape Enclosure (P/N 0034B0X) is a 4U rack-mounted enclosure that supports four full-high or six half-high tape drives. The backplate includes six 0.8mm VHDCI external
connectors for attachment of up to six servers. Internal connection of tape drives requires the single-drop terminated LVD SCSI cable that ships with the tape drive, which also provides
termination for the SCSI bus. A single 200w power supply with a low-voltage power cord is standard. An external SCSI storage cable is not provided. Refer to Appendix D: Cables - Storage
Units - Controllers to select a supported cable.
8. Required to connect one channel of the integrated Ultra320 storage controller to the 0.8mm VHDCI external port, which cannot be enabled if both channels of the integrated controller are
connected internally.
9. This tape drive must be shipped separately as an option and installed at a customer site. Factory or vendor installation prior to shipping is not supported.
10. Supported only in new builds of External Half-High SCSI Storage Enclosure (P/N 3510020), indicated by AI Header J1PJK on the outside box label of the tape enclosure.
Note: Additional tape attributes can be found in Appendix A: Tape Drive Attributes.
61
IBM xSeries 235