IBM IntelliStation - ps-2

122
Part
Number
Part Number Description
1, 2
Rack and NetBAY
Refer to the Rack Cabinets and Options section for information concerning IBM racks and rack-supported devices.
2, 3
Console Connectivity
1735L04 NetBAY Local Console Manager
1735R16 NetBAY Remote Console Manager
32P1636 250mm KVM Conversion Option
32P1652 1.5m KVM Conversion Option
09N4290 NetBAY 1x4 Console Switch
09N4291 NetBAY 2x8 Console Switch
Keyboard and Mouse2, 4
28L3644 Space Saver II Keyboard5, 6
7, 8
10K3849 106-key Preferrd USB Keyboard with 2-port USB Hub (stealth black)
28L3673 Sleek 2-Button Stealth Black Mouse
1. xSeries 440 is housed in a 19in rack-mountable drawer and requires one of the racks listed in the Rack Cabinets and Options section.
2. Sixteen-way configurations support console connections only through the primary chassis.
3. Refer to the Rack Console Options section for information regarding console connectivity using these options.
4. xSeries 440 supports rack configurations only and ships without a keyboard or mouse. The system includes three USB ports (one on front of chassis), SVGA video port,
mouse port and keyboard port. USB ports are not active on the secondary server in 16-way configurations. Only PS/2 devices are supported in 16-way configurations, attached
to the primary server only.
5. Installation within a rack requires optional keyboard tray (P/N 28L4707) which stows in ready-to-use position, or NetBAY 1U or 2U Flat Panel Monitor Console Kit (P/N 32P1032,
32P1702). Standard with 1U and 2U NetBAY console kits (P/N 32P1031, 32P1702).
6. Advanced TrackPoint IV features are not available on IBM xSeries systems.
7. Installation within a rack requires optional keyboard tray (P/N 28L4707). This keyboard cannot share a keyboard tray with a flat panel display.
8. USB accessories attach to a single USB-capable server. They are not compatible with the NetBAY console switches. Sixteen-way configurations require a PS/2 connector for
keyboard, video and mouse.
Tape Drives
xSeries 440 Tape Options
Bays
Supported 1
SCSI
Interface
(bit)
Form Factor Termination
Included
Ext Tape
Enclosures
00N8016 100/200GB LTO Tape Drive - 16 Ultra2 LVD 133mm (5.25in) FH Y2 3503B1X
24P2396 100/200GB LTO Half-High Tape Drive5 - 16 Ultra2 LVD 133mm (5.25in) HH Y2 -
59P6736 160/320GB SDLT Tape Drive - 16 Ultra2 LVD 133mm (5.25in) FH Y 2
3503B1X
59P6744 LTO FH Generation-2 Tape Drive Option - 16 Ultra2 LVD 133mm (5.25in) FH Y 2
Tape Autoloaders
3503B1X
360726X 3607 Series 1.6TB/3.2TB LTO Tape Autoloader
External Tape Libraries
- 16 Ultra2 LVD 2U Rack Y -
3
4560SLX SDLT/LTO Modular Tape Library
External Tape Enclosures
- 16 Ultra2 LVD 5U Rack Y -
3503B1X Full-High SCSI Tape Enclosure 4
- 16 Ultra2 LVD
Desktop or
3U Rack
Y -
1. IBM xSeries 440 does not support internal tape drives. An external tape library or tape enclosure must be used. All tape drives and enclosures are supported by PCI Wide Ultra160 SCSI
Adapter (P/N 19K4646) or Single Channel Ultra320 SCSI Controller (P/N 71P8594), which have an external 0.8mm VHDCI connector. Select tape drive, enclosure and controller then use
Appendix D: Cables - Storage Units - Controllers to select an appropriate external cable.
2. Termination requires installing the 34in single-drop, terminated LVD SCSI cable provided with the option.
3. Tape library attributes and prerequisites are located in Appendix B: Tape Library Attributes.
4. Black desktop or 3U rack tape enclosure supports a single 133mm (5.25in) full-high LVD tape device including DLT tape drives. Requires a fixed shelf if installed in a rack (allow additional
1U for fixed shelf). Includes a 90w power supply, cooling fan, external terminator, power cord (country-specific), and 2m 68-pin to 0.8mm external cable.
5. This tape drive must be shipped separately as an option and installed at a customer site. Factory or vendor installation prior to shipping is not supported.
Note: Additional tape attributes can be found in Appendix A: Tape Drive Attributes.