IBM IntelliStation - ps-2

228
Total Configuration Runtime Estimator (time in minutes) 1
Number of Battery Packs
Internal Only +1 +2 +3 +4
Total Load
(Watts)
Runtime
Hours /
Minutes
Runtime
Hours /
Minutes
Runtime
Hours /
Minutes
Runtime
Hours /
Minutes
Runtime
Hours /
Minutes
200 1 / 45 7 / 5 13 / 32 19 / 50 24 / 16
250 1 / 15 5 / 48 11 / 57 17 / 36 20 / 56
300 1 / 9 3 / 58 9 / 42 14 / 36 17 / 36
350 60 3 / 24 8 / 43 13 / 15 16 / 42
400 50 2 / 50 6 / 55 10 / 55 15 / 3
450 45.5 2 / 41 5 / 59 9 / 50 14 / 0
500 41.8 2 / 37 5 / 12 8 / 53 12 / 32
550 39 2 / 33 4 / 36 8 / 0 11 / 7
600 35.5 2 / 24 3 / 37 6 / 29 8 / 55
650 33.8 2 / 19 3 / 14 5 / 51 8 / 19
700 30.6 2 / 12 3 / 1 5 / 10 7 / 51
750 28 2 / 7 2 / 52 4 / 47 7 / 30
800 23.7 1 / 54 2 / 42 3 / 57 6 / 7
850 21.9 1 / 48 2 / 38 3 / 29 5 / 23
900 20 1 / 40 2 / 34 3 / 13 4 / 58
950 18.1 1 / 30 2 / 30 3 / 0 4 / 36
1000 15.5 1 / 20 2 / 21 2 / 52 3 / 46
1100 14.4 1 / 8 2 / 15 2 / 50 3 / 35
1200 13 1 / 1 2 / 8 2 / 43 3 / 9
1300 12.3 57.5 2 / 4 2 / 39 3 / 0
1400 10.9 53 1 / 54 2 / 32 2 / 49
1500 10 51.4 1 / 48 2 / 28 2 / 45
1600 8.4 48 1 / 35 2 / 19 2 / 39
1700 7.7 46.3 1 / 30 2 / 13 2 / 37
1800 6.85 42 1 / 15 2 / 0 2 / 30
1900 6.5 39.7 1 / 6 1 / 54 2 / 24
2000 6.2 37 1 / 2 1 / 48 2 / 18
2100 5.7 32.4 58 1 / 37 2 / 9
2200 5.5 30.8 56.3 1 / 33 2 / 7.5
2300 5.1 28.9 53.9 1 / 25 2 / 3
2400 4.9 28.2 53 1 / 21 1 / 59
2500 4.45 26.9 50.7 1 / 13 1 / 50
2600 4.2 26 49.4 1 / 9 1 / 46
2700 4 25.1 48.3 1 / 6 1 / 42
2800 3.8 24.2 47 1 / 2.5 1 / 39
2850 3.6 23.4 46 1 / 0 1 / 36
1. Data provided by APC.
Steps:
1. Identify the devices contained in the configuration.
2. Sum the load (watts) of all devices in the configuration. Use either Maximum Load for minimum runtime or Typical Load
for typical runtime.
3. Find the Total Configuration Load in the table above.
4. Select the most appropriate battery pack column to achieve the desired runtime.
NOTE: If the Total Configuration Load is greater than the entries above, split the load across two or more UPS units.