IBM IntelliStation - ps-2

Part
Number
Updated 07/01/03
Tape Drives
xSeries 445 Tape Options
Bays
Supported 1
SCSI
Interface
(bit)
00N8016 100/200GB LTO Tape Drive - 16 Ultra2 LVD
24P2396 100/200GB LTO Half-High Tape Drive 5
- 16 Ultra2 LVD
59P6736 160/320GB SDLT Tape Drive - 16 Ultra2 LVD
59P6744 LTO FH Generation-2 Tape Drive Option - 16 Ultra2 LVD
360716X
360726X
Tape Autoloaders
3607 Series 1760G/3.5TB SDLTpro Tape
Autoloader
3607 Series 1.6TB/3.2TB LTO Tape
Autoloader
External Tape Libraries 3
Form
Factor
133mm
(5.25in) FH
133mm
(5.25in) HH
133mm
(5.25in) FH
133mm
(5.25in) FH
Termination
Included
Ext Tape
Enclosures
For the latest product & technical information, refer to the Information Sources on pages 2 & 3.
Y 2
Y 2
Y 2
Y 2
3503B1X
0034B1X
0034B1X
3510020 7
3503B1X
0034B1X
0034B0X
3503B1X
- 16 Ultra2 LVD 2U Rack Y -
- 16 Ultra2 LVD 2U Rack Y -
4560SLX SDLT/LTO Modular Tape Library
External Tape
Enclosures
- 16 Ultra2 LVD 5U Rack Y -
0034B0X NetBAY Tape Enclosure (Rack Mount) 4 4U Rack N -
3503B1X Full-High SCSI Tape Enclosure 5
- 16 Ultra2 LVD
Desktop or
3U Rack
Y -
3510020 External Half High SCSI Storage Enclosure 6
16 LVD Desktop N -
00N7956
Associated Options
68-pin External Multimode LVD/SE SCSI
Terminator
- 16 LVD/SE External Y 3510020
1. xSeries 445 does not support internal tape drives. An external tape library or tape enclosure must be used. All tape drives and enclosures are supported by the integrated SCSI controller
connected to the external 0.8mm VHDCI connector. Both PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) and Single Channel Ultra320 SCSI Controller (P/N 71P8594) support external tape
attachment for all compatible devices through the external 0.8mm VHDCI connector. Select tape drive, enclosure and controller then use Appendix D: Cables - Storage Units - Controllers to
select an appropriate external cable.
2. Termination requires installing the 34in single-drop, terminated LVD SCSI cable provided with the option.
3. Tape library attributes and prerequisites are located in Appendix B: Tape Library Attributes.
4. NetBAY Tape Enclosure (P/N 0034B0X) is a 4U rack-mounted enclosure that supports four full-high or six half-high tape drives. The backplate includes six 0.8mm VHDCI external connectors
for attachment of up to six servers. Internal connection of tape drives requires the single-drop terminated LVD SCSI cable that ships with the tape drive, which also provides termination for the
SCSI bus. A single 320w power supply with a low-voltage power cord is standard. An external SCSI storage cable is not provided. Refer to Appendix D: Cables - Storage Units - Controllers to
select a supported cable.
5. Black desktop or 3U rack tape enclosure supports a single 133mm (5.25in) full-high LVD tape device including DLT tape drives. Requires a fixed shelf if installed in a rack (allow additional 1U
for fixed shelf). Includes a 90w power supply, cooling fan, external terminator, power cord (country-specific) and 2m 68-pin to 0.8mm external cable.
6. Black desktop tape enclosure that supports a single 133mm (5.25in) half-high (HH) tape drive. Internal and external connectors are 68-pin high-density supporting LVD. Requires 68-pin
External Multimode LVD/SE SCSI Terminator (P/N 00N7956). External cables are not included. Refer to Appendix D: Cables - Storage Units - Controllers to select a supported cable.
7. Requires 68-pin External Multimode LVD/SE SCSI Terminator (P/N 00N7956).
Note: Additional tape attributes can be found in Appendix A: Tape Drive Attributes.
137
IBM xSeries 445