02.11.2012 Views

IBM IntelliStation - ps-2

IBM IntelliStation - ps-2

IBM IntelliStation - ps-2

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

xSeries 360 contains five front-accessible drive bays located on the right side of the server. The top two bays contain the standard slim-line CD-ROM and 1.44MB<br />

slim-line diskette drive. Three 3.5in slim-line, hot-swap drive bays are located beneath them. The IDE CD-ROM is docked to a media interposer card that is cabled<br />

to the lightpath card before terminating at the system planar. The three SCA2-compliant hot-swap bays attach to a hot-swap backplane that connects to the<br />

integrated single-channel Ultra160 controller through an integrated bus. For RAID configurations, a cable provided with the system is connected to one of the<br />

internal connectors of the RAID controller and the other end of the cable is attached to a connector that supports the hot-swap HDD backplane, located on the<br />

planar between slot one and the memory card, beneath the memory options.<br />

For additional information regarding internal cabling, refer to Appendix F: Internal Cabling Overview.<br />

Updated 07/01/03<br />

xSeries 360 Memory<br />

Part<br />

Number<br />

Memory Description1 Total Memor y1 Quantity of RDIMMs Added2 33L3281 256MB PC 1600 ECC DDR SDRAM RDIMM<br />

33L3283 512MB PC1600 ECC DDR SDRAM RDIMM<br />

33L3285 1GB PC1600 ECC DDR SDRAM RDIMM<br />

33L3287<br />

2GB PC1600 CL2 ECC DDR SDRAM RDIMM<br />

Memory Upgrade 2<br />

1. Due to two-way interleaving, all RDIMMs must be installed in pairs in the<br />

order indicated by the diagram. Chipkill support is provided on the memory<br />

card. Only installation in pairs is supported. The order of installation in pairs is<br />

sockets one and two, three and four, five and six, and seven and eight<br />

2. Installation of 2GB RDIMMs requires BIOS and diagnostic firmware version<br />

1.08 or later. When more than 8GB of memory is installed, the integrated SCSI<br />

controller must be disabled. .<br />

Memory Card Assembly<br />

RDIMM socket 1<br />

RDIMM socket 3<br />

RDIMM socket 5<br />

RDIMM socket 7<br />

RDIMM socket 2<br />

RDIMM socket 4<br />

RDIMM socket 6<br />

RDIMM socket 8<br />

Processor 4<br />

Processor 2<br />

1GB<br />

(2x512MB<br />

model)<br />

Processor 1<br />

Processor 3<br />

2GB<br />

(4x512MB<br />

models)<br />

256MB<br />

(33L3281)<br />

512MB<br />

(33L3283)<br />

1GB<br />

(33L3285)<br />

2GB<br />

(33L3287) 4<br />

2GB 3GB 4 - - -<br />

2.5GB 3.5GB 2 2 - -<br />

3GB 4GB - 4 - -<br />

3.5GB 4.5GB 2 - 2 -<br />

4GB 5GB - 2 2 -<br />

5GB 6GB - - 4 -<br />

6GB - - 2 4 -<br />

7GB - - - 6 -<br />

8GB 8GB3 - - 8 -<br />

9GB 10GB - - - 4<br />

13GB 13GB 3<br />

- - - 6<br />

16GB 3 16GB 3 - - - 8<br />

This table does not represent all possible memory configurations.<br />

1. Network operating systems may limit the maximum amount of addressable memory. See operating system<br />

specifications for further information.<br />

2. To obtain the quantity of memory identified in the “Total Memory” column, select the appropriate row and<br />

order the quantity of RDIMMs identified in all columns for that row.<br />

3. Requires removal of standard RDIMMs.<br />

4. Installation of 2GB RDIMMs requires BIOS and diagnostic firmware version 1.08 or later. When more than<br />

8GB of memory is installed, the integrated SCSI controller must be disabled.<br />

xSeries 360 Internal SCSI Cabling<br />

For the latest product & technical information, refer to the Information Sources on pages 2 & 3.<br />

105<br />

<strong>IBM</strong> xSeries 360

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!