IBM IntelliStation - ps-2

1.
2.
3.
Updated 07/01/03
FAStT FC-2 Host
Bus Adapter 1
FAStT FC-2 Host
Bus Adapter 1
FASt FC-2 Host
Bus Adapter 1
FASt FC-2 Host
Bus Adapter 1
FASt FC-2 Host
Bus Adapter 1
FASt FC-2 Host
Bus Adapter 1
FASt FC-2 Host
Bus Adapter 1
FASt FC-2 Host
Bus Adapter 1
FASt FC-2 Host
Bus Adapter 1
FASt FC-2 Host
Bus Adapter 1
D2
D2
D2
Fibre Channel Configuration Examples (FAStT600)
Note: The following sample configurations are for illustration only and may not be suitable for any
specific customer installation. Contact your IBM Business Partner or IBM Marketing Representative
for assistance with your specific configuration requirements.
D2
D2
D2
D2
D2
Switch
Switch
D2
D2 or E
D2 or E
Direct Attachment
FAStT600 Storage Server
(P/N 172260U)
High-availability Without Switch
FAStT600 Storage Server
(P/N 172260U)
FAStT600 Storage Server
(P/N 172260U)
FAStT EXP700
FAStT EXP700
1. FAStT FC2 Host Bus Adapter (P/N 24P0960) supports short-wave connections only.
• P = primary path, S = secondary (redundant) path.
• Shaded boxes represent separate hosts.
• Cable groups are represented by letters.
• Maximum of 42 Fibre Channel HDDs are supported by the FAStT600 Storage Server for optimum performance (up to 14 in storage server with remainder in expansion units).
• An optional short- or long-wave SFP Module is required for all FAStT600 storage server and FAStT EXP700 storage connections. SFP Modules are not depicted in these
diagrams. See device drawings at the end of this section for details.
Refer to the Supported Cable Groups chart following the FAStT 200 configuration examples for cable type definitions.
D2 or E
D2
D2
High-availability With Switch
For the latest product & technical information, refer to the Information Sources on pages 2 & 3.
P
D2 or E
P
P
FAStT EXP700
FAStT EXP700
S
S
S
193
IBM FAStT600
Storage Server