02.11.2012 Views

IBM IntelliStation - ps-2

IBM IntelliStation - ps-2

IBM IntelliStation - ps-2

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

186<br />

1.<br />

2.<br />

3.<br />

4.<br />

Fibre / Fibre Configuration Examples (FAStT200)<br />

Note: The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your<br />

<strong>IBM</strong> Business Partner or <strong>IBM</strong> Marketing Representative for assistance with your specific configuration requirements.<br />

FAStT Host<br />

Adapter 1<br />

FAStT Host<br />

Adapter 1<br />

FAStT Host<br />

Adapter 1<br />

FAStT Host<br />

Adapter 1<br />

FAStT Host<br />

Adapter 1<br />

FAStT Host<br />

Adapter 1<br />

FAStT Host<br />

Adapter 1<br />

FAStT Host<br />

Adapter 1<br />

FAStT Host<br />

Adapter 1<br />

D1<br />

D1<br />

D1<br />

D1<br />

D1<br />

D1<br />

E<br />

D1<br />

D1<br />

Switch/Hub<br />

Switch/Hub<br />

Switch/Hub<br />

Switch/Hub 2<br />

D1 or E<br />

D1 or E<br />

D1 or E<br />

FAStT200 Storage Server<br />

(P/N 35421RU)<br />

FAStT200 HA Storage Server<br />

(P/N 35422RU)<br />

FAStT200 HA Storage Server<br />

(P/N 35422RU)<br />

D1 or E<br />

FAStT200 HA Storage Server<br />

(P/N 35422RU)<br />

1. FAStT Host Adapter (P/N 00N6881) supports short-wave connections only.<br />

2. Buffering the long-wave optic cable expanse with a second switch or hub at the remote storage location is required to requalify the signal. A managed hub supports only one<br />

long-wave GBIC.<br />

• P = primary path, S = secondary (redundant) path<br />

• Shaded boxes represent separate hosts.<br />

• Cable grou<strong>ps</strong> are represented by letters.<br />

• Maximum of 60 external storage HDDs are supported for optimum performance (up to 10 in the storage server with the remainder in expansion units).<br />

• The number of servers that can be used in configurations with managed hubs or Fibre Channel switches are dependent on partitioning restrictions of the management system<br />

or cluster software.<br />

• An optional short- or long-wave GBIC is required for all FAStT200 storage server and FAStT EXP500 storage connections. GBICs are not depicted in these diagrams. See device<br />

drawings at the end of this section for details.<br />

• Other Fibre Channel devices may not require optional GBICs. For specific requirements, see the Fibre Device Ports Reference.<br />

Refer to the following Supported Cable Grou<strong>ps</strong> chart for cable type definitions.<br />

D1<br />

D1<br />

D1<br />

P<br />

D1<br />

D1<br />

P<br />

P<br />

P<br />

P<br />

FAStT EXP500<br />

FAStT EXP500<br />

FAStT EXP500<br />

FAStT EXP500<br />

FAStT EXP500<br />

D1<br />

D1<br />

D1<br />

S<br />

S<br />

S<br />

S<br />

S

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!