IBM IntelliStation - ps-2

Part Number 1
8670-31X 2.4 2 1/2 512 512MB/8GB
8670-51X 2.67 3 1/2 512 512MB/8GB
8670-61X 2.8 3 1/2 512 512MB/8GB
8670-71X 3.06 3
Updated 07/01/03
Processor Speed (GHz)
Number of Processors (Std/Max)
L2 ECC Cache (KB)
1/2 512 512MB/8GB
Memory (Std/Max) 4
Rack
(2U)
Rack
(2U)
Rack
(2U)
Rack
(2U)
Form Factor
xSeries 345
Power Supply Quantity (Std/Max)
xSeries 345 At-A-Glance
1/2 P, H, F
1/2 P, H, F
1/2 P, H, F
1/2 P, H, F
O - Power,
O - Fans
O - Power,
O - Fans
O - Power,
O - Fans
O - Power,
O - Fans
Redundancy (Optional, Standard) 5
Hot-Swap (Power, Slots, HDD, Fans)
System Management Processor
Y
Y
Y
Y
2 x 10/100/
1000
2 x 10/100/
1000
2 x 10/100/
1000
2 x 10/100/
1000
D, U320 2/0
D, U320 2/0
D, U320 2/0
D, U320 2/0
0/
880.8GB
0/
880.8GB
0/
880.8GB
0/
880.8GB
24x-
10x
24x-
10x
24x-
10x
24x-
10x
8/6 5/5
8/6 5/5
8/6 5/5
8/6 5/5
1. Housed in a 19in rack-mountable drawer and ships standard without a keyboard or mouse. See Rack Cabinets and Options section for supported IBM racks. If installed in older
IBM racks, the server should not be installed behind a glass door that blocks air flow. Remove the glass door or replace with an optional perforated door. To order a rack extension
kit for withdrawn IBM racks, visit the Options Continuation Program Website at www.pc.ibm.com/ww/ocp.
2. Intel Xeon processor with advanced transfer L2 cache and 400MHz (quad-pumped) access to memory and I/O buses.
3. Intel Xeon processor with advanced transfer L2 cache and 533MHz (quad-pumped) access to memory and I/O buses.
4. High-speed, two-way interleaved 133MHz DDR PC2100 RDIMM. Maximum amount includes four 2GB RDIMMs, which requires replacing the standard RDIMMs. When either two
or four 2GB RDIMMs are installed, thermal limitations require redundant cooling provided by installing 350w Hot-swap Redundant Power Supply (P/N 59P4057) for400MHz FSB
models and 533MHz FSB models with 2.67 or 2.8GHz processors. Redundant fans are standard with 533MHz FSB models for 3.06GHz processors, but redundant power is required
to support installation of 2GB RDIMMs.
5. Power supply redundancy for 400MHz FSB models and 533MHz models with 2.67 or 2.68 GHz processors requires installation of optional 350w Hot-swap Redundant Power
Supply (P/N 59P4057), which includes a power supply, line cord and three hot-swap fans that provide redundant cooling. Power redundancy for 533MHz models with 3.06GHz
processor requires 514w Hot-swap Power Supply Upgrade (P/N 74P4965), which does not include additional fans because all eight fans are shipped standard with the system.
6. The dual-channel, Ultra320 integrated controller supports both Ultra160 and Ultra320 HDDs, but the entire SCSI bus will default to the slower rate (MB/second) if HDDs of different
technologies are mixed on the same bus. The LSI chipset allows for two HDDs to be allocated for mirroring if a RAID adapter is not installed. One additional HDD may be designated
as a hot-spare for HDDs configured in the onboard mirror. Mirrored and hot-spare HDDs must be matched.
7. xSeries 345 includes two slim-line media bays populated by a standard slim-line CD-ROM and a floppy disk drive.
8. Total capacity includes installation of six 146.8GB slim-line (SL) hot-swap HDDs.
9. Variable read rate. Actual playback speed will vary and is often less than the maximum possible.
10. Three slots are horizontal full-size slots (two full-length and one half-length) and two are vertical low-profile slots that are both full-length (see I/O Options section).
xSeries 345 Processors
Onboard Ethernet (Mbps)
SCSI Controller (Dual, Ultra, RAID) 6
Internal HDD Storage (Std/Max) 8
Removable Media Bays (Total/Avail) 7
CD-ROM (IDE) 9
Part
Number
Processor Upgrades
SMP
Support1 Processor
Speed
Upgrade 2
37L3533 2.4GHz/400MHz-512KB L2 Cache Upgrade Option with Xeon Processor 31X -
71P8966 Upgrade Xeon Processor 2.67GHz/533MHz-512KB L2 Cache 51X -
71P8967 Upgrade Xeon Processor 2.8BGHz/533MHz-512KB L2 Cache 61X 51X
02R1988 3.06GHz/533MHz-512KB L2 Cache Xeon Processor 71X -
1. One additional processor may be installed, providing a maximum of two. All processors must be identical in type, speed, and cache size.
2. Requires removal of the standard processor. A maximum of two processors may be installed. All processors must be identical in type, speed and cache
size. Upgrades may require a BIOS update. To obtain the latest Flash BIOS, access www.pc.ibm.com/support and enter machine “Type-Model” in Quick Path.
Select “Downloadable files” then “BIOS.”
Bays (Total/Avail)
For the latest product & technical information, refer to the Information Sources on pages 2 & 3.
Slots (Total/Avail) 10
95
IBM xSeries 345