IBM IntelliStation - ps-2
IBM IntelliStation - ps-2
IBM IntelliStation - ps-2
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
50<br />
00N7956<br />
Associated Options<br />
68-pin External Multimode LVD/SE SCSI<br />
Terminator<br />
- 16 LVD/SE Ext Y 3510020<br />
32P8164 External SCSI Interface Kit - 16 LVD Int N -<br />
Note:<br />
All models include an integrated Ultra320 SCSI controller. Nonhot-swap models include a four-drop multimode terminated LVD SCSI cable. Hot-swap models include a one-drop<br />
nonterminated cable. To enable external attachment to channel B of the integrated SCSI controller, optional External SCSI Interface Kit (P/N 32P8164) is required, which provides a 0.8mm<br />
VHDCI external connector. All SCSI tape drives and external tape enclosures are supported by PCI Wide Ultra160 SCSI Adapter (P/N 19K4646), which includes a five-drop multimode<br />
terminated LVD SCSI cable and an external 0.8mm VHDCI connector, or Single Channel Ultra320 SCSI Controller (P/N 71P8594), which includes a four-drop multimode LVD SCSI cable. SCSI<br />
tape drives installed internally can be connected to channel A of the integrated controller using the cable that shi<strong>ps</strong> with the tape drive if the HDDs or hot-swap backplane are attached to<br />
ServeRAID-4Lx. If ServeRAID-5i is installed, channel B can be configured to support half-high SCSI tape drives installed in an external tape enclosure or installed in bay two.<br />
1. All models include a two-drop IDE cable for attachment to the CD-ROM and an IDE tape drive.<br />
2. To determine external cable requirements, note the tape drive's SCSI interface, the appropriate SCSI controller from the system configurator section and the desired enclosure, then refer to<br />
Appendix D: Cables - Storage Units - Controllers.<br />
3. Termination requires installing the 34in single-drop, terminated LVD SCSI cable provided with the option.<br />
4. Requires 68-pin External Multimode LVD/SE SCSI Terminator (P/N 00N7956).<br />
5. NetBAY Tape Enclosure (P/N 0034B0X) is a 4U rack-mounted enclosure that supports four full-high or six half-high tape drives. The backplate includes six 0.8mm VHDCI external<br />
connectors for attachment of up to six servers. Internal connection of tape drives requires the single-drop terminated LVD SCSI cable that shi<strong>ps</strong> with the tape drive, which also provides<br />
termination for the SCSI bus. A single 320w power supply with a low-voltage power cord is standard. An external SCSI storage cable is not provided. Refer to Appendix D: Cables - Storage<br />
Units - Controllers to select a supported cable.<br />
6. Black desktop tape enclosure that supports a single 133mm (5.25in) half-high (HH) tape drive. Internal and external connectors are 68-pin high-density supporting LVD. Requires 68-pin<br />
External Multimode LVD/SE SCSI Terminator (P/N 00N7956). External cables are not included. Refer to Appendix D: Cables - Storage Units - Controllers to select a supported cable.<br />
7. This tape drive must be shipped separately as an option and installed at a customer site. Factory or vendor installation prior to shipping is not supported.<br />
8. Supported only in new builds of External Half-High SCSI Storage Enclosure (P/N 3510020), indicated by AI Header J1PJK on the outside box label of the tape enclosure.<br />
Note: Additional tape attributes can be found in Appendix A: Tape Drive Attributes.<br />
xSeries 225 Sample Configurations<br />
Note: The following sample configurations are for illustration only and may not be suitable for any specific customer installation. Contact your<br />
<strong>IBM</strong> Business Partner or <strong>IBM</strong> Marketing Representative for assistance with your specific configuration requirements.<br />
Sales and Distribution Application Server (tower solution for 150 users)<br />
Part<br />
Number<br />
Description Quantity<br />
8647-42X xSeries 225 2.67GHz/533MHz-512KB Xeon, 256MB ECC, 36.4GB, 48x 1<br />
24P7861 2.67GHz/533MHz-512KB L2 Cache Upgrade with Xeon Processor 1<br />
33L5038 512MB DDR PC2100 ECC RDIMM 2 1<br />
25P3492 ServeRAID-5i Controller 1<br />
32P0723 36.4GB 10Krpm Ultra320 SCSI HDD 3 2<br />
48P7042 20/40GB TR7 Internal IDE Tape Drive 1<br />
32P8164 External SCSI Interface Kit 1<br />
35311RU EXP300 Storage Expansion Unit 1<br />
09N7296 EXP300 Rack-to-Tower Conversion Kit 1<br />
06P5755 36.4GB 10Krpm Ultra160 SCSI Hot-swap SL HDD 83 9512AB1 T541 Flat Panel Color Monitor 15in (381mm, 15in viewable image), stealth black 1<br />
94G3136 APC Smart-UPS 1400 1<br />
94G3134 APC Smart-UPS 700 4 1<br />
1. For a total of 1.25GB of system memory.<br />
2. Three HDDs are configured in RAID-5. Effective capacity is two HDDs or 72.8GB.<br />
3. Eight HDDs are configured in RAID-5 with one hot-spare. Effective capacity is six HDDs or 218.4GB.<br />
4. This UPS is optional if required to support the EXP300 Storage Expansion Unit.<br />
Part<br />
Number<br />
File and Print Server (tower solution for 2,000 users)<br />
Description Quantity<br />
8647-52X xSeries 225 2.8GHz/533MHz-512KB Xeon, 256MB ECC, 36.4GB, 48x 1<br />
24P8054 2.8GHz/533MHz-512KB L2 Cache Upgrade with Xeon Processor 1<br />
33L5038 512MB DDR PC2100 ECC RDIMM 2 1<br />
32P0723 36.4GB 10Krpm Ultra320 SCSI HDD 32 00N7991 20/40GB DDS/4 4mm Internal Tape Drive 1<br />
06P5740 ServeRAID-4Lx Ultra160 SCSI Controller 2 3<br />
22P6801 PRO/1000XT Server Adapter by Intel (copper) w/CD, manuals 1<br />
35311RU EXP300 Storage Expansion Unit 1<br />
09N7296 EXP300 Rack-to-Tower Conversion Kit 1<br />
03K9310 Netfinity 2m Ultra2 SCSI Cable 1<br />
06P5755 36.4GB 10Krpm Ultra160 SCSI Hot-swap SL HDD 12 4<br />
9512AB1 T541 Flat Panel Color Monitor 15in (381mm, 15in viewable image), stealth black 1<br />
94G3136 APC Smart-UPS 1400 1
Change language