IBM IntelliStation - ps-2

FAStT200 HA Storage Server (P/N 35422RU)
GBIC Port 10/100 Ethernet Port
RS-232
Hot-swap Fan Hot-swap Power Hot-swap Fan
GBIC Port
• Contains two hot-plug RAID controllers. Each controller provides a single
host Fibre Channel arbitrated loop and a single storage Fibre Channel
arbitrated loop.
• Integrated 10/100Mbps Ethernet connector and RS-232 service support port.
• Performance optimized for 60 HDDs - supports optional FAStT EXP500
Storage Expansion Units (P/N 35601RU).
• Two hot-swap 350W auto-ranging, redundant power supplies.
• Redundant fans: two hot-swap, dual-fan units.
• LED indicators on all critical components warn of faults, over-temperature,
and other abnormalities.
• Ten drive bays - supports slim-line or half-high Fibre Channel hot-swap
HDDs.
• Height is 3U (1U=1.75in or 44.45mm).
• Supports long- and short-wave connections. Requires optional GBICs for
each connection. GBICs not included.
SAN Fibre Channel Switch, 8-port (P/N 3534F08)
• Provides 2Gb per second port-to-port throughput with autosensing
capability for connecting to 1Gb per second host servers, storage and
switches with full operability.
• Contained in a 1U mechanical.
• Includes a comprehensive set of management tools that support a Web
browser interface.
• Four short-wave SFP Modules (optical transceivers) are standard.
• Supports up to 192 ports in a single 42U rack (scalable to 239 switches
maximum).
• Additional related options include F08 Full Fabric Activation (P/N 18P5060),
Performance Bundle Activation (P/N 18P4405), Fabric Manager Version 4.0
(P/N 17P7180) and F08 Advanced Security Activation (P/N 18P4411).
SAN Fibre Channel Switch, 16-port (P/N 2109F16)
• Provides 2Gb per second port-to-port throughput with autosensing
capability for connecting to 1Gb per second host servers, storage and
switches with full operability.
• Contained in a 1U mechanical, requiring half the rack space of the 1Gb
16-port switch.
• Up to four Inter-Switch Links can be trunked for throughput of up to 8Gb per
second.
• Includes a comprehensive set of management tools that support a Web
browser interface.
• Eight short-wave SFP Modules (optical transceivers) are standard.
• Built-in redundancy with no single points of failure.
• Supports up to 384 ports in a single 42U rack (scalable to 239 switches
maximum).
• Ships with one hot-swap 126W power supply. and supports an optional
redundant power supply (P/N 18P3576).
• Additional related options include Remote Switch Activation (P/N 18P3579),
Extended Fabric Activation (P/N 18P3580), F16 Performance Bundle
Activation (P/N 18P3590), Fabric Manager Version 4.0 (F16) (P/N 18P7182)
and F16 Advanced Security Activation (P/N 18P3596). Power cords for
nonrack installation are available by country.
Updated 07/01/03
LC-SC Fibre Channel Adapter Cable (P/N 19K1250)
• Nine-inch adapter cable used to connect 1Gb cable or devices to 2Gb
cable or devices.
• To plug into a FAStT Host Adapter integrated GBIC (or any short-wave
GBIC), remove the black caps from the 1Gb male SC connector (B).
• To attach LC-LC cable, remove the white caps from the 2Gb female LC
connector (A) and insert the male connector of the LC-LC cable.
Host SFP
Module
ports
A (female LC) B (male SC)
FAStT900 Storage Server (P/N 174290U)
Mini hub
Expansion bays for
additional mini hubs
Mini hub
Power supplies
• Dual high-performance RAID controller cards supporting up to 772MB/sec of
throughput.
• Operates at 1Gb or 2Gb (autosensing).
• Dual 175w auto-ranging, hot-swap, redundant power supplies.
• Attach directly to FC2-133 Host Bus Adapter (P/N 24P0960) with short-wave
cables and SFP Modules or indirectly through the SAN Fibre Channel
Switch, 16-port (P/N 2109F16) or TotalStorage SAN Switch F08, 8-port
(P/N 3534F08) using LC-LC cables from cable group D2 or E with
corresponding SFP Modules.
• Height is 4U (1U = 1.75in or 44.45mm).
• For optimum performance no more than two FAStT900 Storage Servers
(P/N 174290U) should be attached to a a single Fibre Channel switch.
• Includes four FAStT700 Mini Hubs (P/N 19K1269), two host-side and two
storage drive-side.
• Each controller is equipped with 1GB of cache (2GB total).
• All connections to FAStT700 Mini Hubs require the use of SFP Modules,
which are not included.
FAStT600 Storage Server (P/N 172260U)
Ethernet Ethernet
Host port 2
Expansion port
Host port 2
Host port 1
AC power
connector
Serial port Serial port
Host port 1
AC power
switch
Server ID
switch
AC power
connector
Drive SFP
Module
ports
Expansion port
AC power
switch
• Compact 3U rack-mountable enclosure.
• Dual 2Gbps RAID controllers with 256MB cache (128MB per controller)
supporting up to 400MB/s of throughput.
• Fourteen Fibre Channel HDD bays (over 2TB of storage capacity).
• Redundant hot-swap 390w power supplies and cooling fans.
• Supports two FAStT EXP700 Expansion Units via EXP700 attachment
features.
• Supports RAID types 0, 1, 3, 5, 10.
• Four host ports standard (two per controller), attaching to either Fibre
Channel switched fabrics or host servers.
• Short and long-wave Fibre Channel host attachment.
• FAStT Storage Manager v8.33 with upgrade capability for eight storage
partitions.
• All host and expansion connections require SFP Modules (not included).
For the latest product & technical information, refer to the Information Sources on pages 2 & 3.
201
Fibre Channel Overview