IBM IntelliStation - ps-2

Updated 07/01/03
xSeries 225 I/O Options
Part
Number
Description
Adapter
Length
PCI
Support3 Slots
Supported1 Hot-
Plug4 PCI
Voltage
MHz
1, 2
Storage Controllers
37L6889 ServeRAID-4H Ultra160 SCSI Controller5 Full 64-bit 2 ... 4 - Universal 33
06P5736 ServeRAID-4Mx Ultra160 SCSI Controller6 Full 64-bit 2 ... 4 - Universal 66
06P5740 ServeRAID-4Lx Ultra160 SCSI Controller 7
Half 64-bit 2 ... 5 - Universal 66
19K4646 PCI Wide Ultra160 SCSI Adapter8 Half 32-bit 1 ... 5 - Universal 33
71P8594 Single Channel Ultra320 SCSI Controller9 Half 64-bit 1 ... 5 - Universal 133
25P3492 ServeRAID-5i Controller10 Full 64-bit 4 - Universal 66
Fibre Storage Controllers and Options 11
24P0960 FC2-133 Host Bus Adapter Half 64-bit 2 ... 5 - Universal 133
17421RU FAStT700 Fibre Channel Storage Server - - - - - -
172260U FAStT600 Storage Server (US line cord, English pubs) - - - - - -
35421RU FAStT200 Storage Server - - - - - -
35422RU FAStT200 HA Storage Server - - - - - -
3534F08 TotalStorage SAN Switch F08, 8-port - - - - - -
2109F16 SAN Fibre Channel Switch, 16-Port
Networking
- - - - - -
12
Ethernet13 06P3601 10/100 Ethernet Server Adapter14 Half 32-bit 1 ... 5 - Universal 33
22P4901 10/100 Dual Port Server Adapter14 Half 64-bit 2 ... 5 - Universal 66
22P6801 PRO/1000XT Server Adapter by Intel (copper) w/CD14 Half 64-bit 2 ... 5 - Universal 133
22P7801 NetXtreme 1000 SX Fiber Ethernet Adapter Half 64-bit 2 ... 5 - Universal 133
31P6301 NetXtreme 1000 T Ethernet Adapter (copper) 14 Half 64-bit 2 ... 4 - Universal 133
31P6401 NetXtreme 1000 T Dual Port Ethernet Adapter (copper) 14
Token Ring
Half 64-bit 2 ... 5 - Universal 133
34L5201 High-speed 100/16/4 Token-ring PCI Mgmt Adapter 14
Half 32-bit 1 ... 5 - Universal 33
34L5001 16/4 Token-ring PCI Management Adapter14 Communications
Half 32-bit 1 ... 5 - Universal 33
15
33L4618 V.90 PCI Data/Fax Modem 16
Half 32-bit 1 - 5 33
System Management
09N7585 Remote Supervisor Adapter 17
Half 32-bit 1 - Universal 33
1. The dual-channel, Ultra320 integrated controller supports both Ultra160 and Ultra320 HDDs, but the entire SCSI bus will default to the slower rate (MB/second) if HDDs of different
technologies are mixed on the same bus. The LSI chipset allows for two HDDs to be allocated for mirroring if a RAID adapter is not installed. One additional HDD may be designated as a hotspare
for HDDs configured in the onboard mirror. Mirrored and hot-spare HDDs must be matched.
2. xSeries 225 includes a dual-channel Ultra320 SCSI controller with two internal connectors. An external high density 68-pin connector can be enabled using optional External SCSI Interface
Kit (P/N 32P8164) to connect channel B to an external SCSI connector. External connection using this option and the external knockout is not supported if both channels of the integrated
controller are connected internally, in which case a supported PCI SCSI controller is required to support an external SCSI device.
3. A 32-bit adapter installed into a 64-bit slot will restrict the data transfer rate to 32-bit. Adapters rated at 66MHz will operate at 33MHz when installed in a 33MHz slot. 33MHz adapters will
reduce 100MHz buses to 33MHz. 133MHz PCI-X adapters are backward compatible with 33/66MHz, 64-bit PCI-based servers, but will only operate at the rated bus frequency or frequency of
the slowest adapter in the bus in which it is installed. 64-bit adapters are not supported in slot one.
4. xSeries 225 does not support hot-plug PCI slots.
5. ServeRAID-4H Ultra160 SCSI Controller is powered by a 266MHz PowerPC 750 processor and provides 128MB of battery-backed ECC cache with two internal and four external Ultra160
connectors (a combination of four connectors may be utilized). External connectors are 0.8mm VHDCI. In hot-swap models, if the standard internal SCSI cable is too short for internal RAID
attachment, order FRU #90P0891.
6. ServeRAID-4Mx Ultra160 SCSI Controller is powered by a 100MHz Intel Zion GC80303 processor that provides 64MB of battery-backed ECC cache and two internal and two external
Ultra160 connections (only two connectors may be used). External connections are 0.8mm VHDCI. In hot-swap models, if the standard internal SCSI cable is too short for internal RAID
attachment, order FRU #90P0891.
7. ServeRAID-4Lx Ultra160 SCSI Controller is powered by a 100MHz Intel Zion GC80303 processor and provides a single channel, 32MB of ECC cache and either one internal or one external
Ultra160 connection. External connector is 0.8mm VHDCI. In hot-swap models, if the standard internal SCSI cable is too short for internal RAID attachment, order FRU #90P0891.
8. PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) provides a single channel with one internal connector, a five-drop multimode terminated LVD SCSI cable and one external 0.8mm VHDCI
connector. Only one of the two connectors may be utilized.
9. Single Channel Ultra320 SCSI Controller (P/N 71P8594) provides a single channel with one 68-pin internal connector, a four-drop multimode terminated LVD SCSI
cable and one external 0.8mm VHDCI connector. Only one of the two connectors may be utilized. Hardware is included in the option to support either low-profile
(2U) or full-size (3U) installations.
10. ServeRAID-5i (P/N 25P3492) supports both Ultra320 and Ultra160 HDDs in a dedicated or mixed environment. The adapter installs into PCI slot four and converts both channels of the
onboard SCSI controller to RAID in conjunction with the LSI 1020/30 chipset. The standard SCSI HDD backplane cables directly to the integrated controller connector. Some tape drives can
be supported either internally or externally on the seocnd channel of an integrated controller managed by ServeRAID-5i if the bus is designated as SCSI during RAID set-up. Supports up to
528MB/s data transfers across the PCI bus with 128MB ECC SDRAM write-back cache with battery backup. Supports RAID levels 0, 1, 10, 5, 50 and 1E.
11. See Fibre Channel Solutions Overview section for additional configuration information.
12. The integrated copper 10/100/1000Mbps Broadcom (BCM5703) single-port Ethernet controller supports Wake on LAN.
13. In a fault-tolerant networking environment, using the fault-tolerant software delivered with the Ethernet adapters of a single manufacturer is recommended. Installing fault-tolerant solutions
provided by multiple manufacturers may cause failures if the intermediate drivers provided with the adapters are not compatible. Two optional adapters are copper and Intel-based (P/N
06P3601, 22P6801). Two are Broadcom-based (22P7801, 31P6301).
For the latest product & technical information, refer to the Information Sources on pages 2 & 3.
47
IBM xSeries 225