IBM IntelliStation - ps-2

8687-4RX 2, 15 1.5 4 2/8 1MB 2GB/32GB 8 Rack
(4U)
8687-5RX 2, 15 1.9 4 2/8 1MB 2GB/32GB 8 Rack
(4U)
8687-6RX 2, 15 1.9 4 4/8 1MB 4GB/32GB 8 Rack
(4U)
8687-7RX 2, 15 2 4 4/8 2MB 2GB/32GB 8 Rack
(4U)
8687-3RY 2 2.4 5 2/4 512KB 2GB/32GB 8 Rack
(4U)
8687-4RY 2
8687-1VX 3
8687-2VX 3
Updated 07/01/03
2.4 5 4/4 512KB 4GB/32GB 9 Rack
(4U)
1.4 6 8/8 512KB 4GB/32GB 9 Rack
(4U)
1.5 6 8/8 512KB 4GB/32GB 9 Rack
(4U)
8687-3VX 3 1.6 6 8/8 1MB 4GB/32GB 9 Rack
(4U)
8687-4VX 3 1.5 6 8/8 1MB 4GB/32GB 9 Rack
(4U)
8687-5VX 3 1.9 6 8/8 1MB 4GB/32GB 9 Rack
(4U)
8687-7VX 3
1, 15
Part Number
2 6
Memory (Std/Max)
Processor Speed (GHz)
Number of Processors (Std/Max) 8
L3 ECC Cache
8/8 2MB 4GB/32GB 9 Rack
(4U)
Form Factor
xSeries 440
Power Supply Quantity (Std/Max) 10
xSeries 440 At-A-Glance
2/2 P, S, H, F
2/2 P, S, H, F
2/2 P, S, H, F
2/2 P, S, H, F
2/2 P, S, H, F
2/2 P, S, H, F
2/2 P, S, H, F
2/2 P, S, H, F
2/2 P, S, H, F
2/2 P, S, H, F
2/2 P, S, H, F
2/2 P, S, H, F
Hot-Swap (Power, Slots, HDD, Fans)
S-Fans,
S-Power
S-Fans,
S-Power
S-Fans,
S-Power
S-Fans,
S-Power
S-Fans,
S-Power
S-Fans,
S-Power
S-Fans,
S-Power
S-Fans,
S-Power
S-Fans,
S-Power
S-Fans,
S-Power
S-Fans,
S-Power
S-Fans,
S-Power
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
System Management Adapter 11
Redundancy (Optional, Standard)
10/100/
1000
10/100/
1000
10/100/
1000
10/100/
1000
10/100/
1000
10/100/
1000
10/100/
1000
10/100/
1000
10/100/
1000
10/100/
1000
10/100/
1000
10/100/
1000
Onboard Ethernet (Mbps)
SCSI Controller (Dual, Ultra, RAID)
D, U160 2/0 0/146.8GB
D, U160 2/0 0/146.8GB
D, U160 2/0 0/146.8GB
D, U160 2/0 0/146.8GB
D, U160 2/0 0/146.8GB
D, U160 2/0 0/146.8GB
D,U160 2/0 0/146.8GB
D,U160 2/0 0/146.8GB
D,U160 2/0 0/146.8GB
D,U160 2/0 0/146.8GB
D,U160 2/0 0/146.8GB
D,U160 2/0 0/146.8GB
Internal HDD Storage (Std/Max)
Removable Media Bays (Total/Avail)
CD-ROM (IDE) 12
Note: Refer to the Datacenter Solutions section for additional xSeries 440 models configured with Microsoft Windows 2000 Datacenter Server (licensed for up to 16 processors).
24x-
10x
24x-
10x
24x-
10x
24x-
10x
24x-
10x
24x-
10x
24x-
10x
24x-
10x
24x-
10x
24x-
10x
24x-
10x
24x-
10x
4/2 6/6
4/2 6/6
4/2 6/6
4/2 6/6
4/2 6/6
4/2 6/6
4/2 6/6
4/2 6/6
4/2 6/6
4/2 6/6
4/2 6/6
4/2 6/6
1. Housed in a 19in rack-mountable drawer and ships standard without a keyboard or mouse. See Rack Cabinets and Options section for supported IBM racks.
2. This xSeries 440 model supports the IXA Adapter (P/N 1519100) for connection to iSeries models for Microsoft Windows 2000 Server and Advanced Server. The adapter must
be installed in PCI slot two only.
3. This model supports VMware ESX Server 1.5 for 16 processors (P/N 481716X) only. A list of operating systems supported by VMware is available at
www.vmware.com/products/server/esx_features.html (go to VMware.com, click Products, then Servers). Standard features in each chassis include eight Xeon processors, eight
RDIMMs, two SMP Expansion Modules, two 2.5m and one 250mm scalability cables, and an Ethernet crossover cable for use if both systems are not connected to an enterprise
network. This model must be purchased with a matching model as a set of two chassis' that operate as a single system through scalability cables and BIOS settings.
4. Intel Xeon MP processor with integrated full-speed ECC L3 cache and 4x100MHz (quad-pumped) access to memory and I/O buses.
5. Intel Xeon processor with integrated full-speed ECC L2 cache and 4x100MHz (quad-pumped) access to memory and I/O buses. A maximum of two processors can be installed
in each SMP Expansion Module (four total per system).
6. Intel Xeon MP processor with integrated full-speed ECC L3 cache and 4x100MHz (quad-pumped) access to memory and I/O buses. Models 1 ... 7VX include eight processors
installed standard in two SMP Expansion Modules (processors installed in models 1 ... 3VX are different from models 4 ... 7VX and mutually incompatible). These models must be
purchased with a matching eight-way model totalling 16 processors in two chassis’ connected with six standard copper-colored SMP expansion cables (two 2.5m and one 250mm
cables with each model). Sixteen-way capable xVX models are sold only in pairs, not separately.
7. Either two or six additional optional processors are supported in models 4RX and 5RX. Four additional optional processors are supported in models 6RX and 7RX. In these four
models, xSeries SMP Expansion Module (P/N 59P5188) is required to increase maximum support of processors from four to eight and memory options from 16 to 32. The optional
SMP Expansion Module requires four processors prepopulated and a minimum of four RDIMMs (eight if memory mirroring is enabled). In models 3RY and 4RY, a maximum of two
processors can be installed in each SMP Expansion Module (memory options can be added as with models 1 ... 3RX). Model 3RY ships with two processors installed in a single
SMP Expansion Module. Model 4RY contains two SMP Expansion with two processors installed in each. Both models 3RY and 4RY can be upgraded by replacing the standard
Xeon DP processors with Xeon MP processors, which then allows all functionality and compatibility of models 1 ... 3RX. Models 1 ... 7VX are sold only in matching pairs of eightway
models with two standard SMP Expansion Modules populated with four RDIMMs each totalling 16 processors and eight RDIMMs.
8. Advanced Chipkill ECC memory controller corrects single, two-, three-, and four-bit memory errors. Memory options are four-way interleaved. Sixteen sockets are provided in
standard models, four of which are populated with 512MB RDIMMs in models 4RX, 5RX and 7RX and with 1GB RDIMMs in model 6RX. An additional 16 sockets are supported with
the installation of xSeries SMP Expansion Module (P/N 59P5188).
Bays (Total/Avail)
For the latest product & technical information, refer to the Information Sources on pages 2 & 3.
Slots (Total/Avail) 13
113
IBM xSeries 440