IBM IntelliStation - ps-2

136
xSeries 445 Power, Monitors & Accessories
Part
Description
Number
Power1 Uninterruptible Power Supply (UPS) 2
32P1020 APC 2U Smart-UPS 1400RMB
2130R30 UPS3000XLV3 2130R31 UPS3000XHV3 32P1692 UPS Extend Run Battery Pack3 37L6861 APC Smart-UPS 5000RMB4 Monitors 5
633147N E54 Color Monitor 15in (350mm, 13.8in viewable image), stealth black 6
63324HN E74 Color Monitor 17in (406mm, 16in viewable image), stealth black 6
66274AN G78 Color Monitor 17in (406mm, 16in viewable image), stealth black 6
32P1031 NetBAY 1U Flat Panel Monitor Console Kit (with US Space Saver keyboard) 7
32P1032 NetBAY 1U Flat Panel Monitor Console Kit (without keyboard) 7
32P1702 NetBAY 2U Flat Panel Monitor Console Kit (with US Space Saver keyboard) 7
32P1703 NetBAY 2U Flat Panel Monitor Console Kit (without keyboard) 7
1. xSeries 445 includes two 1050W, hot-swap power supplies with two 2.8m/9ft IEC 320-C13 to IEC 320-C14 power cables for intrarack power distribution. Models shipped in the
US also include two 2.8m/9ft IEC 320-C13 to NEMA 6-15P power cords for attachment to high voltage power sources. Power supply redundancy is standard for all configurations
with a high voltage power source. If a low voltage source is used, power supplies operate at 550w and redundancy is supported only for configurations with two processors (low
voltage is not supported for 16-way installations).
2. For runtimes and UPS attributes see Appendix C: UPS Runtime Estimate.
3. Height is 2U. See Rack Cabinets and Options section for supported IBM racks.
4. Height is 5U. See Rack Cabinets and Options section for supported IBM racks.
5. xSeries 445 uses an SVGA controller (ATI Rage XL) with 8MB of video memory. Optional video adapters are not supported. Sixteen-way configurations support console
connections only through the primary chassis.
6. Installation within a rack requires optional Monitor Compartment (P/N 94G7444).
7. Includes a 15in Flat Panel Monitor.
Part
Number
Description
Rack and NetBAY1, 2
Refer to the Rack Cabinets and Options section for information concerning IBM racks and rack-supported devices.
2, 3
Console Connectivity
1735L04 NetBAY Local Console Manager
1735R16 NetBAY Remote Console Manager
32P1636 250mm KVM Conversion Option
32P1652 1.5m KVM Conversion Option
73P5832 USB Conversion Option (four-pack)
09N4290 NetBAY 1x4 Console Switch
09N4291 NetBAY 2x8 Console Switch
Keyboard and Mouse4 5, 6
28L3644 Space Saver II Keyboard
7, 8
10K3849 106-key Preferred USB Keyboard with 2-port USB Hub (stealth black)
28L3673 Sleek 2-Button Stealth Black Mouse
1. xSeries 445 is housed in a 19in rack-mountable drawer and requires one of the racks listed in the Rack Cabinets and Options section.
2. Sixteen-way configurations support console connections only through the primary chassis.
3. Refer to the Rack Console Options section for information regarding console connectivity using these options.
4. xSeries 445 supports rack configurations only and ships without a keyboard or mouse. The system includes three USB ports (one on the front of the chassis), SVGA video port,
mouse port and keyboard port. USB ports are not active on the secondary server in 16-way configurations.
5. Installation within a rack requires optional keyboard tray (P/N 28L4707) which stows in ready-to-use position, or NetBAY 1U or 2U Flat Panel Monitor Console Kit (P/N 32P1032,
32P1702). Standard with 1U and 2U NetBAY console kits (P/N 32P1031, 32P1702).
6. Advanced TrackPoint IV features are not available on IBM xSeries systems.
7. Installation within a rack requires optional keyboard tray (P/N 28L4707). This keyboard cannot share a keyboard tray with a flat panel display.
8. USB accessories attach to a single USB-capable server or to either the Local or Remote Console Manager using a USB Conversion Option (P/N 73P5832).