IBM IntelliStation - ps-2
IBM IntelliStation - ps-2
IBM IntelliStation - ps-2
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Updated 07/01/03<br />
Tower or Rack Mount<br />
International UPS3000XLV UPS3000XHV UPS Extend Run<br />
Battery Pack<br />
Part Number 32P1681<br />
various<br />
32P1692<br />
United States UPS3000XLV UPS3000XHV UPS Extend Run<br />
Battery Pack<br />
Part Number 2130R30<br />
2130R31<br />
32P1692<br />
UPS Attributes<br />
Communications Links to Servers Serial/USB/Enet Serial/USB/Enet -<br />
Color black black black<br />
EIA Height<br />
Int’l Models<br />
2U 2U 2U<br />
50 or 60Hz, single phase, VAC: 120(120) 2 220-240(xxx) 2, 3 -<br />
10-Amp, IEC 320-C13 (Device) receptacles 6 7 -<br />
16-Amp, IEC 320-C19 (PDU) receptacles - 15 -<br />
Receptacles (NEMA L5-20R) 17 - -<br />
Line Cord Length, NEMA Plug 9ft, L5-30P - -<br />
Line Cord Receptacle (IEC 320-)<br />
US Models<br />
- C20 -<br />
50 or 60Hz, single phase, VAC: 120(120) 2<br />
200-240(208) 2<br />
-<br />
Receptacles (NEMA 5-15R) - - -<br />
Receptacles (NEMA L5-20R) 1 7<br />
- -<br />
10-Amp, IEC 320-C13 (Device) receptacles 6 4<br />
7 4<br />
-<br />
16-Amp, IEC 320-C19 (PDU) receptacles - 15 -<br />
Line Cord Length, NEMA Plug 9ft, L5-30P - -<br />
Line Cord Receptacle (IEC 320-) - C206 -<br />
1. Data provided by APC.<br />
2. How-to-Read example for 200-240(208): Input VAC is 200-240 as is the UPS output when electric service is active. When electric<br />
service is interrupted and the UPS is on battery, the UPS output is 208 VAC.<br />
3. Battery output may be set to 220, 225, 230, or 240 VAC.<br />
4 .Four IEC power cables are provided to attach devices to the UPS outlets, which are 2m long with IEC 320-C13 / C14 connectors.<br />
5. One 2m PDU jumper cable shi<strong>ps</strong> with the UPS for attachment from the IEC 320-C19 receptacles to a Power Distribution Units (PDUs)<br />
with C20 inlets.<br />
6. US line cord is 8ft (2.5m) long with NEMA L6-20P power plug.<br />
7. Includes L5-20P to L5-15R adapter cable.<br />
Ste<strong>ps</strong>:<br />
1. Identify the devices contained in the configuration.<br />
2. Sum the load (watts) of all devices in the configuration. Use either Maximum Load for minimum runtime or Typical Load for typical<br />
runtime.<br />
3. Find the Total Configuration Load in the table above.<br />
4. Select the most appropriate UPS model to achieve the desired runtime.<br />
NOTE: If the Total Configuration Load is greater than the entries above, split the load across two or more UPS units.<br />
For the latest product & technical information, refer to the Information Sources on pages 2 and 3.<br />
227<br />
UPS Runtime
Change language