02.11.2012 Views

IBM IntelliStation - ps-2

IBM IntelliStation - ps-2

IBM IntelliStation - ps-2

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Updated 07/01/03<br />

RXE-100 Remote Expansion Enclosure External HDD Storage<br />

Part<br />

External Storage Expansion Units<br />

Number<br />

1<br />

Form Factor<br />

35311RU EXP300 Storage Expansion Unit2 Rack (3U)<br />

17401RU FAStT EXP700 Storage Expansion Unit 3<br />

Rack (3U)<br />

35601RU FAStT EXP500 Storage Expansion Unit4 Rack (3U)<br />

5, 6<br />

35421RU FAStT200 Storage Server Rack (3U)<br />

35422RU FAStT200 HA Storage Server5 Rack (3U)<br />

19K1121 FAStT200 Redundant RAID Controller -<br />

1. To configure an external SCSI storage device, select an optional SCSI controller then refer to Appendix D:<br />

Cables - Storage Units - Controllers to confirm the controller supports the desired External Storage Expansion Unit<br />

and to select a supported cable. For HDD or other expansion unit options, see the specific expansion unit section.<br />

For Fibre Channel storage devices, refer to the Fibre Channel Solutions Overview section.<br />

2. EXP300 includes a single 2M Ultra2 SCSI cable and dual hot-swap 500w redundant power supplies, each with<br />

its own power cord.<br />

3. FAStT EXP700 Storage Expansion Unit (P/N 17401RU) includes dual hot-swap 400w power supplies, each with<br />

its own power cord.<br />

4. FAStT EXP500 Storage Expansion Unit (P/N 35601RU) includes dual hot-swap 350w power supplies, each with<br />

its own power cord.<br />

5. The FAStT200 includes two hot-swap, 350w auto-ranging redundant power supplies, each with its own power<br />

cord.<br />

6. Can be upgraded to FAStT200 HA Storage Server through the addition of a FAStT200 Redundant RAID<br />

Controller (P/N 19K1121).<br />

RXE-100 Remote Expansion Enclosure I/O Options<br />

Bus 3: PCIX Slot 1, 3.3V<br />

Bus 3: PCIX Slot 2, 3.3V<br />

Bus 2: PCIX Slot 3, 3.3V<br />

Bus 2: PCIX Slot 4, 3.3V<br />

Bus 1: PCIX Slot 5, 3.3V<br />

Bus 1: PCIX Slot 6, 3.3V<br />

All slots are 64-bit, full-length, 133MHz Active PCI-X. Each bus supports only one 133MHz<br />

adapter. If two 133MHz adapters are installed, both will operate at 100MHz. If a lower<br />

frequency adapter is installed, the bus will operate at that frequency.<br />

Scan sequence: slots 11, 12, 9, 10, 7, 8, 17, 18, 15, 16, 13, 14.<br />

For the latest product & technical information, refer to the Information Sources on pages 2 & 3.<br />

151<br />

<strong>IBM</strong> RXE-100

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!