IBM IntelliStation - ps-2

40
Part
Number
Part Number Description
Conversion Kits
09N4300 4Ux20D Tower-to-Rack Kit
Rack and NetBAY1 Refer to the Rack Cabinets and Options section for information concerning IBM racks and
rack-supported devices.
Console Connectivity2 1735L04 NetBAY Local Console Manager
1735R16 NetBAY Remote Console Manager
32P1636 250mm KVM Conversion Option
32P1652 1.5m KVM Conversion Option
09N4290 NetBAY 1x4 Console Switch
09N4291 NetBAY 2x8 Console Switch
Keyboard and Mouse3 28L3644
4, 5
Space Saver II Keyboard
10K3849
6, 7
106-key Preferred USB Keyboard with 2-port USB Hub (stealth black)
31P7415 Preferred Pro Full-size Keyboard - 104 Keys (stealth black)
28L3673 Sleek 2-button Stealth Black Mouse
1. Rack installation of an xSeries 205 requires 4Ux20D Tower-to-Rack Kit (P/N 09N4300) and one of the racks listed in the Rack
Cabinets and Options section.
2. Refer to the Rack Console Options section for information regarding console connectivity using these options.
3. xSeries 205 models ship standard with both a mouse and nonspace saver keyboard.
4. Installation within a rack requires optional keyboard tray (P/N 28L4707) which stows in ready-to-use position, or NetBAY 1U or 2U Flat
Panel Monitor Console Kit (P/N 32P1032, 32P1702). Standard with 1U and 2U NetBAY console kits (P/N 32P1031, 32P1702).
5. Advanced TrackPoint IV features are not available on IBM xSeries systems.
6. Installation within a rack requires optional keyboard tray P/N 28L4707. This keyboard cannot share a keyboard tray with a flat panel
display.
7. USB accessories attach to a single USB-capable server. They are not compatible with the NetBAY console switches.
Tape Drives
48P7042 20/40GB TR7 Internal IDE Tape Drive 2
xSeries 205 Tape Options
Bays
Supported
SCSI
Interface
(bit)
2, 4 -
Form Factor Termination
Included
89mm (3.5in) SL or
133mm (5.25in) HH
Ext Tape
Enclosures 1
- -
00N7991 20/40 GB DDS/4 4mm Internal Tape Drive 3
2 16 Ultra2 LVD
89mm (3.5in) HH or
133mm (5.25in) HH
Y 4
3510020 5
24P2396 100/200GB LTO Half-High Tape Drive3, 7, 8 2 16 Ultra2 LVD 133mm (5.25in) HH Y4 35100205 24P2398
40/80GB Half-High DLTVS Internal SCSI Tape
Drive 3, 8 2 16 Ultra2 LVD 133mm (5.25in) HH Y 4
3510020 5
59P6746 VXA-2 80/160GB Tape Drive 3
2 16 Ultra2 LVD 133mm (5.25in) HH Y 4
3510020 5
External Tape Enclosures
3510020 External Half High SCSI Storage Enclosure 6
Associated Options
- 16 LVD Desktop N -
00N7956
68-pin External Multimode LVD/SE SCSI
Terminator
Note: Hot-swap models do not support installation of a SCSI tape drive on the same bus that supports the hot-swap backplane.
- 16 LVD/SE External Y 3510020
1. To determine external cable requirements, note the tape drive's SCSI interface, the appropriate SCSI controller from the system configurator section and the desired enclosure, then refer to
Appendix D: Cables - Storage Units - Controllers.
2. SCSI models include a two-drop EIDE cable for attachment to the CD-ROM and an IDE tape drive.
3. EIDE models require optional PCI Wide Ultra160 SCSI Adapter (P/N 19K4646), which includes a five-drop multimode LVD SCSI cable.
4. When installed internally, termination requires installing the 34in single-drop, terminated LVD SCSI cable provided with the option.
5. Requires 68-pin External Multimode LVD/SE SCSI Terminator (P/N 00N7956).
6. Black desktop tape enclosure that supports a single 133mm (5.25in) half-high (HH) tape drive. Internal and external connectors are 68-pin high-density supporting LVD. Requires 68-pin
External Multimode LVD/SE SCSI Terminator (P/N 00N7956). External cables are not included. Refer to Appendix D: Cables - Storage Units - Controllers to select a supported cable.
7. This tape drive must be shipped separately as an option and installed at a customer site. Factory or vendor installation prior to shipping is not supported.
8. Supported only in new builds of External Half-High SCSI Storage Enclosure (P/N 3510020), indicated by AI Header J1PJK on the outside box label of the tape enclosure.
Note: Additional tape attributes can be found in Appendix A: Tape Drive Attributes.