IBM IntelliStation - ps-2

Updated 07/01/03
Part Number Description
1, 2
Rack and NetBAY
Refer to the Rack Cabinets and Options section for information concerning IBM racks and
rack-supported devices.
Console Connectivity3 06P4792 C2T Interconnect Cable Chain Technology Cable Kit4 1735L04 NetBAY Local Console Manager
1735R16 NetBAY Remote Console Manager
32P1637 C2T Conversion Option
09N4290 NetBAY 1x4 Console Switch
09N4291 NetBAY 2x8 Console Switch
Keyboard and Mouse 5
28L3644
6, 7
Space Saver II Keyboard
10K3849
8, 9
106-key Preferred USB Keyboard with 2-port USB Hub (stealth black)
28L3673 Sleek 2-button Stealth Black Mouse
1. xSeries 335 is housed in a 19in rack-mountable drawer and requires one of the racks listed in the Rack Cabinets and Options section.
2. Note limitations and restrictions required for adequate cooling in the Rack Cabinets and Options section. If non-IBM racks are to be used, assure that both front
and rear doors offer a minimum of 48% open area uniformly distributed and in line with installed servers. A clearance of 51 to 64mm (2 to 2.5in) must be maintained
between the front door and the system unit's front bezel. The rear door must maintain the same or greater clearance.
3. Refer to the Rack Console Options section for information regarding console connectivity using these options.
4. A C2T Interconnect Cable Chain Technology Cable Kit (P/N 06P4792) may be used for the attachment of console devices to one or multiple chained xSeries
335s. The kit contains a 2m (6.5ft) breakout cable for attachment to a keyboard, mouse and monitor as well as a 2m (6.5ft) chaining cable for connecting two
xSeries 335s together when the standard 260mm (10in) chaining cable is not long enough. A maximum of 42 xSeries 335s are supported in a single chain. No
more than one Cable Chain Technology Cable Kit may be used. If the last server in the chain is connected to a console switch rather than directly to a monitor, a
console cable (P/N 09N4293 or 94G7447) is required in addition to the cable kit. System management interconnect network functionality is transmitted between
x335 systems through the C2T Interconnect cable.
5. xSeries 335 supports rack configurations only and ships without a keyboard or mouse.
6. Installation within a rack requires optional keyboard tray (P/N 28L4707) which stows in ready-to-use position, or NetBAY 1U or 2U Flat Panel Monitor Console Kit
(P/N 32P1032, 32P1702). Standard with 1U and 2U NetBAY console kits (P/N 32P1031, 32P1702).
7. Advanced TrackPoint IV features are not available on IBM xSeries systems.
8. Installation within a rack requires optional keyboard tray (P/N 28L4707). This keyboard cannot share a keyboard tray with a flat panel display.
9. USB accessories attach to a single USB-capable server. They are not compatible with the NetBAY console switches.
For the latest product & technical information, refer to the Information Sources on pages 2 & 3.
89
IBM xSeries 335