02.11.2012 Views

IBM IntelliStation - ps-2

IBM IntelliStation - ps-2

IBM IntelliStation - ps-2

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

58<br />

8. Single Channel Ultra320 SCSI Controller (P/N 71P8594) provides a single channel with one 68-pin internal connector, a four-drop multimode terminated LVD SCSI<br />

cable and one external 0.8mm VHDCI connector. Only one of the two connectors may be utilized. Hardware is included in the option to support either low-profile<br />

(2U) or full-size (3U) installations.<br />

9. ServeRAID-5i (P/N 25P3492) supports both Ultra320 and Ultra160 HDDs in a dedicated or mixed environment. The adapter installs into PCI slot four and converts both channels of the<br />

onboard SCSI controller to RAID in conjunction with the LSI 1020/30 chi<strong>ps</strong>et. Both the standard and the optional SCSI HDD backplanes cable directly to the onboard controller connectors.<br />

Some tape drives can be supported either internally or externally on the second channel of an integrated controller managed by ServeRAID-5i if the bus is designated as SCSI during RAID<br />

setup. Supports up to 528MB/s data transfers across the PCI bus with 128MB ECC SDRAM write-back cache with battery backup. Supports RAID levels 0, 1, 10, 5, 50 and 1E.<br />

10. See Fibre Channel Solutions Overview section for additional configuration information.<br />

11. xSeries 235 includes a copper integrated 10/100/1000Mb<strong>ps</strong> Broadcom (BCM5703) single-port Ethernet controller.<br />

12. In a fault-tolerant networking environment, using the fault-tolerant software delivered with the Ethernet adapters of a single manufacturer is recommended. Installing fault-tolerant solutions<br />

provided by multiple manufacturers may cause failures if the intermediate drivers provided with the adapters are not compatible.Two optional Ethernet adapters are copper and Intel-based<br />

(P/N 06P3601, 22P6801). Two are Broadcom-based (P/N 22P7801, 31P6301).<br />

13. The Wake on LAN (WoL) function provided by this Ethernet PCI adapter is supported in this system.<br />

14. xSeries 235 provided three USB ports (two on the rear of the chassis and one on the front), one serial port, two RS-485 ports for system management and one parallel port.<br />

15. Due to homologation variances, modem availability may differ by country.<br />

16. When installed in xSeries 235, Remote Supervisor Adapter (RSA) shares functionality with the integrated service processor and serves as interface for both. RSA provides full system<br />

management functionality through a customer-supplied Ethernet cable or modem connection or as part of an interconnected system management bus (option includes all interconnect<br />

hardware). An external Cat5 connection between RSA and the integrated service processor using the pigtail cable and short Cat5 cable supplied with RSA is not required. The 20-pin ribbon<br />

cable connecting RSA to the planar meets all powering and signaling requirements. Connection of the external AC power supply provided with RSA is not required.<br />

17. Remote Supervisor Adapter II (P/N 59P2984) includes an internal 20-pin ribbon cable for connection to the system planar, an interconnect cable, a 56w AC power adapter, an intrarack<br />

power cable and a country-specific wall power cord. External connectors include an RS230 (9-pin) serial port, 10/100 base T Ethernet port (RJ-45), interconnect port (RJ-11) and power<br />

connector. The interconnect cable includes a single RJ-11 connector and dual RJ-48 ports. Supports an interconnect network of up to 24 RSAs or ISMPs with aggregate cable connection<br />

length of 300ft (91.4m) or less. No more than 12 ASMPs are supported in an interconnect network. RJ-45 bus is self-terminating, i.e., terminators are not required for the interconnect bus.<br />

18. Models 4xX with 400MHz FSB support most PCI adapters also in slot one.<br />

xSeries 235<br />

rear view<br />

PCI slot 1<br />

PCI slot 2<br />

PCI slot 3<br />

PCI slot 4<br />

PCI slot 5<br />

PCI slot 6<br />

Slot 1: Bus 0, 32-bit, 33MHz, 5v, full-length<br />

Slot 2: Bus 1 (primary), 64-bit, 100MHz, 3.3v, full-length PCI-X<br />

Slot 3: Bus 1 (primary), 64-bit, 100MHz, 3.3v, full-length PCI-X<br />

Slot 4: Bus 1 (secondary), 64-bit, 100MHz, 3.3v, full-length extended PCI-X (supports RAID 5i)<br />

Slot 5: Bus 2, 64-bit, 100MHz, 3.3v, full-length Active PCI-X<br />

Slot 6: Bus 2, 64-bit, 100MHz, 3.3v, full-length Active PCI-X

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!