IBM IntelliStation - ps-2
IBM IntelliStation - ps-2
IBM IntelliStation - ps-2
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
200<br />
FAStT Host Adapter (P/N 00N6881)<br />
• PCI to FCAL 64/32-bit host adapter.<br />
• Compatible with Cable Group D1.<br />
• Integrated short-wave optical port, no GBIC required.<br />
• Full Fibre Channel fabric support.<br />
FAStT EXP500 Storage Expansion Unit<br />
(P/N 35601RU)<br />
Hot-swap<br />
fan<br />
FAStT Host Adapter<br />
GBIC ports<br />
Hot-swap<br />
power supplies<br />
Hot-swap<br />
fan<br />
• Two hot-swap, 350w auto-ranging, redundant power supplies.<br />
• Redundant fans - two hot-swap, dual-fan units.<br />
• LED indicators on all critical components warn of faults, over-temperature,<br />
and other abnormalities.<br />
• Ten drive bays - supports slim-high or half-high Fibre Channel hot-swap<br />
HDDs.<br />
• Height is 3U (1U = 1.75in or 44.45mm).<br />
• Requires optional GBICs for each connection. GBICs not included.<br />
FC2-133 Host Bus Adapter (P/N 24P0960)<br />
FC2-133 Host Bus<br />
Adapter<br />
• PCI-X to FCAL 64-bit host adapter (133Mhz).<br />
• Supported Attachments (use LC-LC cable in group D2):<br />
FAStT700 Storage Server (P/N 17421RU).<br />
• Integrated short-wave optical port, no SFP Module required.<br />
• Full Fibre Channel fabric support.<br />
SFP<br />
Module<br />
ports<br />
FAStT700 Storage Server (P/N 17421RU)<br />
Mini hub<br />
Expansion bays for<br />
additional mini hubs<br />
Mini hub<br />
SFP<br />
Module<br />
ports<br />
Power supplies<br />
• Dual high-performance RAID controller cards — supports up to 390MB/sec<br />
of throughput.<br />
• Operates at 1Gb or 2Gb (autosensing).<br />
• Dual 175w auto-ranging, hot-swap redundant power supplies.<br />
• Attach directly to FC2-133 Host Bus Adapter (P/N 24P0960) with short-wave<br />
cables and SFP Modules or indirectly through either the 8-port or 16-port<br />
2Gb Fibre Channel Switch (P/N 3534F08, 2109F16) using cables from cable<br />
group D2 or E with corresponding SFP Modules.<br />
• Height is 4U (1U = 1.75in or 44.45mm).<br />
• For optimum performance no more than two FAStT700 Storage Servers (P/N<br />
17421RU) should be attached to a a single Fibre Channel switch.<br />
• Includes four FAStT700 Mini Hubs (P/N 19K1269), two host-side and two<br />
storage drive-side.<br />
• Each controller is equipped with 1GB of cache (2GB total).<br />
• All connections to FAStT700 Mini Hubs require the use of SFP Modules,<br />
which are not included.<br />
FAStT700 MIni Hub (P/N 19K1269)<br />
SFP Module ports<br />
SFP Module<br />
• Provides additional connections to the FAStT Storage Server — supports<br />
complex clustering or advanced storage applications.<br />
• All connections to FAStT700 Mini Hubs require the use of SFP Modules. SFP<br />
Modules are not included.<br />
FAStT EXP700 Storage Expansion Unit<br />
(P/N 17401RU)<br />
SFP Module<br />
ports<br />
Hot-swap<br />
fan<br />
Hot-swap<br />
power supplies<br />
Hot-swap<br />
fan<br />
• Two hot-swap, 400w auto-ranging, redundant power supplies.<br />
• Redundant fans - two hot-swap, dual-fan units.<br />
• LED indicators on all critical components warn of faults, over-temperature,<br />
and other abnormalities.<br />
• Fourteen drive bays - supports slim-high Fibre Channel hot-swap HDDs.<br />
• Height is 3U (1U = 1.75in or 44.45mm).<br />
• Requires optional SFP Modules for each connection. SFP Modules not<br />
included.<br />
FAStT200 Storage Server (P/N 35421RU)<br />
GBIC port 10/100 Ethernet port RS-232<br />
Hot-swap fan Hot-swap<br />
power<br />
GBIC port Hot-swap fan<br />
• Contains a single hot-plug RAID controller which provides a single host Fibre<br />
Channel arbitrated loop and a single storage Fibre Channel arbitrated loop.<br />
• Can be upgraded to a FAStT200 HA Storage Server through the addition of a<br />
FAStT200 Redundant RAID Controller (P/N 19K1121).<br />
• Integrated 10/100Mb<strong>ps</strong> Ethernet connector and RS-232 service support port.<br />
• Two hot-swap 350W auto-ranging, redundant power supplies.<br />
• Redundant fans: two hot-swap, dual-fan units.<br />
• LED indicators on all critical components warn of faults, over-temperature,<br />
and other abnormalities.<br />
• Ten drive bays - supports slim-line or half-high Fibre Channel hot-swap<br />
HDDs.<br />
• Height is 3U (1U=1.75in or 44.45mm).<br />
• Supports long- and short-wave connections. Requires optional GBICs for<br />
each connection. GBICs not included.