M-Maxâ„¢ Series Adjustable Frequency Drive - Eaton Corporation

Appendix A
All Parameters
When first switching on or after activating the default settings (S4.2 = 1) parameter P1.1 must
be set to 0 for access to all parameters.
Parameter Selection
Access
FS
PNU ID RUN ro/rw Designation Value Range Page (P1.3)
P1.1 115 rw Quick start parameters 0 = All parameters
1 = Only quick configuration
parameters
65/64 1
P1.2 540 X rw Application 0 = Basic
1 = Pump drive
2 = Fan drive
3 = High load
P1.3 1472 X rw Country specific default
settings (FS)
Analog Input
0 = EU
1 = USA
150 M-Max Series Adjustable Frequency Drive MN04020003E—April 2011 www.eaton.com
65 0
65 0
Access
FS
PNU ID RUN ro/rw Designation Value Range Page (P1.3)
P2.1 379 rw AI1, signal range (microswitch S2)
0 = 0–10V/0–20 mA
1 = 2–10V/4–20 mA
66 0
P2.2 380 rw AI1 custom min –100.00 to 100.00% 66 0
P2.3 381 rw AI1 custom max –100.00 to 100.00% 66 100
P2.4 378 rw AI1 filter time 0.0–10.0s 66 0.1
P2.5 390 rw AI2, signal range (microswitch S3)
Like P2.1
67 1
P2.6 391 rw AI2 custom min –100.00 to 100.00% 67 0
P2.7 392 rw AI2 custom max –100.00 to 100.00% 67 100
P2.8 389 rw AI2 filter time 0.0–10.0s 67 0.1
User
Setting
User
Setting