M-Maxâ„¢ Series Adjustable Frequency Drive - Eaton Corporation

Analog Outputs (P4)
An analog voltage signal from 0–10V is output at control
signal terminal 18. The maximum permissible load is 10 mA.
Reference potential is GND on control signal terminals 3
and 5.
In the factory setting, the voltage signal (0–10V) is
proportional to the output frequency f-Out = 0–fmax (P6.4).
The output signal is not monitored by the frequency inverter.
Analog Outputs
PNU ID
Access
RUN Value/Range Description
Analog Output AO
GND
5
AO