M-Maxâ„¢ Series Adjustable Frequency Drive - Eaton Corporation
M-Maxâ„¢ Series Adjustable Frequency Drive - Eaton Corporation
M-Maxâ„¢ Series Adjustable Frequency Drive - Eaton Corporation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Parameters<br />
Analog Input (P2)<br />
In parameter group P2, you can adapt the analog inputs:<br />
The signal range depends on the switch position of the<br />
microswitches (see figure on this page):<br />
● S2 = V: AI1 (control signal terminal 2), voltage signal<br />
0/2 – +10V<br />
● S3 = mA: AI2 (control signal terminal 4), current signal<br />
0/4 – 20 mA<br />
Reference potential for the analog inputs (AI1, AI2) is GND<br />
(control signal terminals 3 and 5).<br />
The allocation of the analog inputs (AI1, AI2) can be set under<br />
parameter P6.2 and P6.18 (setpoint input) as well as P9.5<br />
and P9.6 (PI controller, actual value).<br />
Analog Inputs<br />
PNU ID<br />
Access<br />
RUN Value/Range Description<br />
Analog Inputs AI1 and AI2<br />
+10V Out<br />
Change language