DIVISION 1 - GENERAL REQUIREMENTS - IDEAS-EC

SECTION 15062PIPE: DUCTILE IRONPART 1 - GENERAL1.1 SECTION INCLUDESA. All ductile iron piping, fittings, and appurtenances.1.2 RELATED SECTIONSA. Section 15060 - Pipe and Pipe Fittings: General StatementB. Section 15090 - Pipe Support Systems.1.3 REFERENCESA. American National Standards Institute (ANSI)1. B1.1, Unified Inch Screw Threads2. B16.1, Cast Iron Pipe Flanges and Flanged Fittings. Class 25, 125, 250 and 800.B. American Society for Testing and Materials (ASTM)1. A183, Standard Specification for Carbon Steel Track Bolts and Nuts2. A194, Standard Specifications for Carbon and Alloy Steel Nuts and Bolts for HighPressure, Temperature Service3. A307, Standard Specification for Carbon Steel Bolts and Studs, 60,000 psi TensileStrengthC. American Water Works Association (AWWA)1. C104, Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water2. C105, Polyethylene Encasement for Ductile Iron Piping for Water and Other Liquids3. C110, Ductile - Iron and Gray Iron Fittings, 3 IN through 48 IN for Water and OtherLiquids4. C111, Rubber-Gasket Joints for Ductile-Iron and Gray-Iron Pressure Pipe and Fittings5. C115, Flanged Ductile Iron Pipe with Threaded Flanges6. C150, Thickness Design of Ductile Iron Pipe7. C151, Ductile Iron Pipe, Centrifugally Cast in Metal Molds or Sand-Lined Molds, forWater or Other Liquids8. C203, Coal Tar Protective Coatings and Linings for Steel Water Pipelines9. C606, Grooved and Shouldered Joints1.4 SUBMITTALSA. Certifications and Testing consistent with Section 01330 and including:1. See Section 15060B. Shop Drawings consistent with Section 01330 and including:1. See Section 1506015062 - 111/07 PIPE: DUCTILE IRON