DIVISION 1 - GENERAL REQUIREMENTS - IDEAS-EC

SECTION 01330SUBMITTALSPART 1 GENERAL1 .1 DESCRIPTIONA. The work of this section consists of submittal requirements before and during construction.1 .2 RELATED REQUIREMENTSA. Closeout submittals - Section 01770.1 .3 SUBMITTAL AND APPROVAL PROCEDURESA. All submittals shall be transmitted using National Park Service form DSC-1(CS), dated 11/95. (Acopy of the form is included at the end of this section.) No action will be taken on a submittalitem unless accompanied by the transmittal form.B. As specified in the individual sections, forward submittals to Contracting Officer at least 30 daysbefore need for approval. Unless a different number is specified, submit one reproducible originaland two copies of each shop drawing, three copies of manufacturer's catalog sheets (cut sheets),three specimens of each sample, and three copies of all other submittals requested.1. Shop Drawings: Include the following information with each copy of shop drawings:a. Date.b. Date of revisions (when applicable).c. Contractor's certification that shop drawing has been checked for compliancewith contract documents.d. Details of fabrication, assembly and erection including connections andengagement to contiguous work.e. Materials used.f. All required dimensions.g. The term "by others" shall not be used. All work to be performed by others shallbe identified by Contractor or subcontractor name, discipline, or trade.2. Samples: Samples shall be large enough to illustrate clearly the functional characteristicsand full range of color, texture, or pattern.3. Manufacturers' Catalog Sheets: Submit only pertinent pages; mark each copy of standardprinted data to identify specific products proposed for use.01330-111/07 SUBMITTALS