DIVISION 1 - GENERAL REQUIREMENTS - IDEAS-EC

2 .3 VINYL COATED POSTSA. Steel Pipe: Type I, ASTM F 1083-93, standard weight Schedule 40; minimum yield strength of25,000 psi; size as indicated. Hot-dipped galvanized with minimum average 1.8 oz/ft 2 of coatedsurface area.1. Terminal posts (end, corner, or pull): Outside diameter, 2.875 inches; Wall thickness,0.203 inches; Weight, 5.79 lb/ft.2. Line posts: Outside diameter, 2.375 inches; Wall thickness, 0.154 inches; Weight, 3.66lb/ft.3. Rails and Braces: Outside diameter, 1.660 inches; Wall thickness, 0.140 inches; Weight,2.27 lb/ft.B. PVC-coated finish: In accordance with ASTM F 1234-93, apply supplemental color coating of10-14 mils of thermally fused PVC.2 .4 VINYL COATED CHAIN LINK SWING GATESA. Gate Frames: Fabricate chain link swinging gates in accordance with ASTM F 900-94 usinggalvanized round steel tubular members. Weld connections to form a rigid one-piece unit.Provide additional horizontal members as necessary to ensure proper strength.B. Vinyl Clad Fabric: Same as fence, color to match. Install fabric with hook bolts and tension barsat all 4 sides. Attach to gate frame at no more than 15 inches on center.C. Hardware Materials: ASTM F 900-94, hot dipped galvanized steel or malleable iron shapes tosuit gate size. Field coat moveable parts with special coating, provided by manufacturer, to matchadjacent finishes.D. Hinges: Structurally capable of supporting gate leaf and allow opening and closing withoutbinding. Non-lift-off type hinge design shall permit gate to swing 180 degrees outward.E. Latch: Forked type capable of retaining gate in closed position and have provision for padlock.Latch shall permit operation from either side of gate.F. Keeper: Gate keeper shall consist of mechanical device for securing free end of gate when in fullopen position.G. Drop Rod: Provide drop rod to hold inactive leaf. Provide gate stop pipe to engage center droprod. Provide locking device and padlock eyes as an integral part of latch, requiring one padlockfor locking both gate leaves.H. Gate Posts: Steel pipe, ASTM F 1083-93, standard weight schedule 40; minimum yield strength25,000 psi; size 3.00 inches. Hot-dipped galvanized with minimum 1.803 ft 2 of zinc.I. PVC Finish: Finish all components with 10-14 mils of thermally fused PVC.2 .5 VINYL COATED ACCESSORIESA. Chain Link Fence Accessories: ASTM F 626(Rev A)-94. Provide items required to completefence system. Galvanize each ferrous metal item in accordance with ASTM A 153-95 and finishto match framing. Finish all components with 10-14 mils of thermally fused PVC.02831-2VINYL COATED CHAIN LINK FENCE