DIVISION 1 - GENERAL REQUIREMENTS - IDEAS-EC

B. Shop Drawings consistent with Section 01330 and including1. See Section 15060PART 2 - PRODUCTS2.01 MATERIALSA. PVC Type 1 and CPVC1. Schedule 40 PVC Pipe and Fittingsa. Pipe: ASTM D1785b. Fittings: ASTM D2466 and D24672. Schedule 80 PVC Pipe and Fittingsa. Pipe: ASTM D1785b. Fittings: ASTM D2464 and D24673. Schedule 40 CPVC Pipe and Fittingsa. Pipe: ASTM F441b. Fittings: ASTM F4384. Schedule 80 CPVC Pipe and Fittingsa. Pipe: ASTM F441b. Fittings: ASTM F4395. Solvent Cementa. ASTM D25646. Nuts and Boltsa. ASTM F593, Type 316 stainless steelb. Two nuts provided for one inch diameter bolt applications and larger7. Rubber Expansion Joints: Materials compatible with chemical and pressurecharacteristics of conveyed substance8. See Piping Specification Schedule on DrawingsB. C900, C905, and D2241 PVC pipe1. Pipea. (AWWA) C900b. Dimension Ratio (DR) (SDR) = Refer to Pipe Schedulec. Working Pressure Rating: Refer to Pipe Schedule2. Fittingsa. Less than 4-inches shall be PVC with solvent cement connections.b. 4-inches and larger shall be DIP fittings, see Section 15062.3. Restrained Jointsa. Thrust blocks as shown on drawingb. Joint Restraint:1) EBAA Iron, Inc. Series 2000 PV mechanical joint restraints or equal2) EBAA Iron, Inc. Series 1600 or Series 2800 or equal at bell and spigotjoints4. See Piping Specification Schedules on Drawings15064 - 211/07 PIPE: PLASTIC (PVC) PRESSURE