DIVISION 1 - GENERAL REQUIREMENTS - IDEAS-EC

SECTION 01360ACCIDENT PREVENTIONPART 1 GENERAL1 .1 DESCRIPTIONA. The work of this section consists of establishing an effective accident prevention program andproviding a safe environment for all personnel and visitors.1 .2 SUBMITTALSA. Accident Prevention Program: Before on-site work begins, submit for approval an accidentprevention program. The Contracting Officer will review the proposed program for compliancewith OSHA and project requirements. If the program requires any revisions or corrections, theContractor shall resubmit the program within 10 days. No progress payments will be made untilthe program is approved. The program shall include:1. Name of responsible supervisor to carry out the program.2. Weekly and monthly safety meetings.3. First aid procedures.4. Outline of each phase of the work, the hazards associated with each major phase, and themethods proposed to ensure property protection and safety of the public, National ParkService personnel, and Contractor's employees. Identify the work included under eachphase by reference to specification section or division numbers.5. Training, both initial and continuing.6. Planning for possible emergency situations, such as floods, fires, cave-ins, slides,explosions, power outages, and wind storms. Such planning shall take into considerationthe nature of construction, site conditions, and degree of exposure of persons andproperty.B. Certificates: Provide certificates from a mechanic that all mechanical equipment has beeninspected and meets OSHA requirements.C. Submit a copy of test reports, as required by OSHA, for personnel working with hazardousmaterials.D. Submit a report of safety meetings and of inspections.E. Upon request, submit proof of employees' qualifications to perform assigned duties in a safemanner.01360-111/07 ACCIDENT PREVENTION