DIVISION 1 - GENERAL REQUIREMENTS - IDEAS-EC

SECTION 01600MATERIAL AND EQUIPMENTPART 1 GENERAL1 .1 DESCRIPTIONA. The work of this section consists of the general procedures for handling, storing, and protectingmaterial and equipment.1 .2 TRANSPORTATION AND HANDLINGA. Arrange deliveries of materials in accordance with construction schedules; coordinate to avoidconflict with work and conditions at the site. Deliver materials in undamaged condition, inmanufacturer's original containers or packaging, with identifying labels intact and legible.Contractor is encouraged to obtain materials in biodegradable or recyclable/reusable packagingwhich uses the minimum amount of packaging possible.1 .3 STORAGE AND PROTECTIONA. Store materials in accordance with manufacturer's instructions, with seals and labels accessiblefor inspection.B. Interior Storage: Maintain temperature and humidity within the ranges required by manufacturer'sinstructions.C. Exterior Storage:1. Store products subject to damage by the elements in weathertight enclosures.2. Store fabricated products above the ground, on blocking or skids; prevent soiling orstaining. Cover products subject to damage or deterioration with impervious sheetcoverings; provide adequate ventilation to avoid condensation.3. Store loose granular materials in a well-drained area on solid surfaces to prevent mixingwith foreign matter.D. Protection After Installation: Provide adequate coverings as necessary to protect installedmaterials from damage resulting from natural elements, traffic, and subsequent construction.Remove when no longer needed.E. Utilize authorized staging areas as per construction drawings, other locations must be approvedby CO.PART 2 PRODUCTSNOT USED.PART 3 EXECUTION NOT USED.END OF SECTION01600-111/07 MATERIAL AND EQUIPMENT