DIVISION 1 - GENERAL REQUIREMENTS - IDEAS-EC

C. Valve Schedule: Mount valve schedule in each equipment room. Valve schedule shall bemounted in glazed display frame, screwed to the wall or plastic laminated with grommets andmounted to the wall.3 .4 EQUIPMENT IDENTIFICATIONA. Manufacturer's Nameplates: Provide on all equipment identifying manufacturer's name,equipment model number, size, capacity, and electrical characteristics. Leave manufacturer'snameplates clean and legible.B. Controls: Label magnetic starters and relays to identify connecting or controlled equipment.Label manual operating switches, fused disconnect switches, and thermal overload switches.Label automatic controls, control panels, zone valves, relays, and starters.C. Equipment: Label each unit with equipment symbol as noted on equipment schedules ondrawings.D. Fire Dampers: Identify fire damper access doors. Paint access door red and stencil each door"FIRE DAMPER ACCESS" with 2-inch high letters.3 .5 ADJUSTING AND CLEANINGA. Relocate any mechanical identification or nameplate which has been visually blocked. Clean faceof identification devices and valve charts.3 .6 COLOR AND IDENTIFICATION SCHEDULEA. Label piping and valves in accordance ASME A13.1-96 and the following table:PIPE LABEL COLOR AND VALVE TAG LETTERING SCHEDULESERVICEFIELD COLOR/LETTER COLORDomestic Cold Water Green/White CWDomestic Hot Water Yellow/Black HWHot Water Circulating Yellow/Black HWCChilled Water Supply Green/White CHSChilled Water Return Green/White CHRHeating Water Supply Yellow/Black HWSHeating Water Return Yellow/Black HWRLiquified Petroleum Gas Yellow/Black LPGCondensate DrainGreen/WhitePART 4 MEASUREMENT AND PAYMENT4 .1 MECHANICAL IDENTIFICATIONVALVETAGA. Payment will be included in the contract bid item to which this work relates.15075-3MECHANICAL IDENTIFICATION