WellCAD Basics - Advanced Logic Technology

BOOK 1 - WELLCAD BASICS - 133
Contact Dictionary dialog boxes showing different libraries for bedding and stratigraphic contacts
As contact styles may or may not cross the entire borehole document, the Base Settings of
each log allows hiding the display of contacts in the log track.
1.5.4 Color Palette Design
Some log types (Image, FWS, VSP, Well,
Mud and Interval Logs) display their data
using a pre defined color palette. You can
design these palettes on your own.
If data is displayed in color variable density
(Color vdl) mode, the color palette used can
be loaded or designed by you. Click the
Palette button to open the Palette Editor
in the Main Settings of the log or click the
in the tool bar.
When designing a new color palette you can
decide whether to assign the colors to the
Data Limits (i.e. the low and high scale
values defined for the log) or to the bin number of the palette (1 to 64). To create a
new palette:
� Within the color Palette Editor click on Clear. This will remove all the
current entries from the palette bar. Next select a color from the list that
you wish to use.