WellCAD Basics - Advanced Logic Technology

Breakout projection style settings dialog box
APPENDIX A - 409
The accurate caliper settings are important if you want to derive the correct tilt angle
and length from your interactively fitted line or polygon.
To swap the references and count the azimuth angle from the right log column
border instead from the left, check the Reverse option.
Enable the Grid option if you would like to display vertical grid lines.
Symbol button:
Structure Tadpole style settings dialog box
When displaying breakout data in Symbol style you can set a low and high scale
value for the azimuth range. Usually the values are set from 0 to 360 degree. If the
vertical gird lines are displayed adjust the frequency of major and minor grid in the
corresponding edit boxes and click on Settings to adjust the grid styles.
Optionally the opening angle of the breakout can be displayed as well. It will be
represented by a horizontal line drawn through the tadpole. The length of the line
reflects the opening angle according to the horizontal scale.