WellCAD Basics - Advanced Logic Technology

62 - BOOK 1 - WELLCAD BASICS
www.alt.lu
There are different ways to access the Base Settings dialog box:
�
Or
Select the log(s) and click the icon or press CTRL + B.
�
Or
Right click on the log handle and select Settings > Base Settings… from the
popup menu.
� Select the log(s) and choose Log Settings > Base Settings… from the View
menu.
The following options can be set:
Title:
The edit box shows the current title (unique identifier) of the log. To alter the title,
simply enter the new name of the log. Be aware that WellCAD adds an extension in
case another log with the same title already exists.
Set the new log name in the Title box.
Position:
You can set the left and right position of the log track in selected units. The default
unit displayed is the one set for the Ruler Bar (see 1.3.2.4 Positioning Logs).
Set the left and right limits of the log border and select the unit you want the position to be measured in.