WellCAD Basics - Advanced Logic Technology

38 - BOOK 1 - WELLCAD BASICS
1.3.2 Basic Log Editing
www.alt.lu
The following paragraphs will describe some fundamental operations that can be
carried out on logs. Knowledge about how to select, position or rename a log is
essential for working with WellCAD. More specific information on how to create a
lithology column, filter and resample data can be found in 1.5 Working with Logs.
Details about the functionality of WellCAD add-on modules can be found in the
relevant books.
All log types have a title zone – or log handle – that displays the name of the log and
other properties of the log. It acts as a handle for selecting, moving, sizing or scaling
the log within the borehole window.
Log title
(log handle)
Log data area
1.3.2.1 Selecting Logs in a Borehole Document
Before any action can be carried out on a log or its data, the log(s) must be selected.
To select a log simply click once onto its log handle. The handle color becomes
inverted to indicate the selected status.
Log not selected
Selected log
If you want to select multiple logs hold the CTRL key pressed while clicking on the
log handles.
To deselect a log, hold down the CTRL and click on the handle of the selected log.
You can also click outside a log (without pressing the CTRL key), but this will
deselect all multiple selected logs as well.