WellCAD Basics - Advanced Logic Technology

176 - BOOK 1 - WELLCAD BASICS
www.alt.lu
When the Statistics Bar is displayed it has besides a top and bottom depth column
no other parameters to display.
Add / Edit Parameters:
Click on the Edit Parameters icon. A new dialog box will be displayed.
Statistics Information dialog box to edit and select input logs and parameters to be computed
To add a new log and parameter click into the next free cell in the Log column to
display a drop down list and select a log. By default the interval Average is preselected.
You can choose a different statistical parameter by clicking into the cell in
the Parameter column (the range of available parameters depends on the input log
type).
To display advanced options check the corresponding box at the bottom of the
dialog box. You can specify the resolution (in units of the current depth axis) of the
tool that measured the parameter to take shoulder effects into account when
calculating the statistical parameters (i.e. the calculation interval will be reduced by
half the resolution at top and bottom.)
The Value column allows specification of a value that will be set if the computation
interval does not contain any data. The options are Interpolated (inserts a value
interpolated between the nearest neighbors), Nearest Min or Max and No Data.
To remove an entry from the list simply select the row and press the Delete key.