WellCAD Basics - Advanced Logic Technology

208 - BOOK 1 - WELLCAD BASICS
www.alt.lu
Classification list.
Click to add a new row to
the classification list.
Uncheck if you do not want
to display points outside the
classification range.
symbol component. The classification list becomes active if a log has been selected
for the corresponding component.
Color classification for a Well Log (left) and Litho Log (right)
� Click the Add button to insert a new row into the classification list.
Depending on the log type you can either enter a low and high value
(e.g. for Well or Mud Logs) or click in the Name column and pick a
category from the drop down list.
� To assign a color or symbol, click in the corresponding cell in the
Color (or Symbol) column and make your selection from the drop
down list.
� If you are dealing with a
log handling lithology
patterns (e.g. lithology log)
you can use the Auto Fill
option, which inserts a
row for each category
found in the log using the
associated color of the
pattern as default color
component. For logs
dealing with numerical
values the following dialog
box pops up.