WellCAD Basics - Advanced Logic Technology

292 - APPENDIX A
www.alt.lu
Conversion to other log types:
The Marker Log can be converted into a Comment Log or Strata Log with a single
column. During the conversion process only the marker name will be transferred as
comment respectively as strata text. In case of a conversion to a Strata Log the
contact styles will be copied as well. The top depth of the Comment and Strata Log
data intervals corresponds to the marker depth. The bottom depth is determined
from the following marker position. In case the last marker in the log is converted,
top and bottom depth of the Comment or Strata interval are the same.
Default Settings:
Default settings are applied when creating a new Marker Log (either automatic when
importing data or manually by the user).
To display the Default Settings dialog box select Tools > Options and click the
Marker Log entry under the Logs knot.
Marker Log default settings
Defaults can be set concerning Contact and Name dictionary, display options,
display styles and log position. The options have already been introduced in the
description of the Main Settings further above.