WellCAD Basics - Advanced Logic Technology

APPENDIX A - 361
Copy:
Copies the data set to the clipboard so that it can be pasted into a borehole
document or an application like MS Excel.
Delete:
Removes the log and its data from the borehole document.
Clear Contents:
Erases all data without removing the log from the document.
Slice at:
Splits the data set into upper and lower part.
Shift by:
Performs a constant depth shift of the entire data set.
Conversion to other log types:
The Image Log can directly be converted into an RGB Log using the color
information of the actual loaded color palette. To convert the log select the Convert
Log To option from the Edit menu.
You can also convert the Image Log into Well Logs. An options dialog box allows
selecting at which Image Log traces will be converted into Well Logs. A Starting
point can be set as well as an Increment. An increment of 10 would output a Well
Log every 90° for a 40 finger caliper measurement but a Well Log every 28.8° for a
288 point acoustic scan.
Select Starting a point and Increment for the conversion of Image Log data to Well Logs.