WellCAD Basics - Advanced Logic Technology

250 - APPENDIX A
www.alt.lu
Log 1 is drawn first
Log 2 is drawn next
Log 3 is drawn on top
- Transparent: The shaded area appears translucent. Grid lines shine through as
well as curves. If two transparent shading colors are superimposed a third color
will be composed automatically.
- Combined: In combined shading mode the area between two curves can be
shaded. To do so, select both logs and call up the Main Settings Dialog box.
Enable shading for both logs and set the shading type to Combined. Click OK
and set a Pen color (shading color) for each of the two logs.
- Horiz. / Vert. Gradient: In horizontal gradient shading mode the area
between log border and curve will be shaded with a color determined from
current data value and selected color palette. The range of color values in the
color palette represents the range of data values between the Low and High
scale values set. Horizontal and vertical is the direction in which the color
gradient is applied.
Click the Palette button to open the Palette Editor (see 1.5.4 Color Palette
Design).