WellCAD Basics - Advanced Logic Technology

APPENDIX A - 373
Clicking the Advanced button allows setting the data point position for the bar
styles. The two figures below illustrate the problem for a data point recorded at a
depth of 1.
Data point position set to
middle of the bar
Data point position set to
bottom of the bar
Select the option from the Advanced Settings dialog box that best fits your needs.
For a Fixed Bar style the mid option might be appropriate while for the Dynamic
Bar the top or bottom might be the best choice. Symbols are always drawn at the
correct depth.
Components:
Load the pattern dictionary and assign a pattern to each component
The Analysis Log displays its data by the means of lithology patterns similar to the
Lithology Log (see 1.5.2 Lithology Columns).