WellCAD Basics - Advanced Logic Technology

1.3.3.4 Copy Settings between Logs
BOOK 1 - WELLCAD BASICS - 69
Once you are happy with the layout of your log handle you can save the settings to
apply them later to another log. Only the layout will be stored. Text for title or
comments is not saved. Click the Save as Defaults button to store the layout.
If you want to recall saved layout information, click the Load Defaults button.
Independent from using the Log Title Settings the user can select two or more logs
and copy the title settings from the master to all other selected logs. The master log
is the one that has been selected first and is usually market with a red frame. To
copy the log title settings:
� Select the log with the settings to copy first.
� Hold down the CTRL key while selecting the logs that will receive the new
settings.
� From the Edit menu select the Copy Title Settings command.
Sometimes it is necessary to copy main, base and/or title settings between logs. This
can be achieved by
� selecting the log providing the settings first
� hold down the CTRL key and select the logs receiving the settings
� Right Click on a title to open the context menu and select Settings > Copy
Settings
� Make your selection of copy options and click OK.
Alternatively you can select the Copy Settings option from the Edit menu.
The Copy Settings dialog box opens.
If all selected log types are of the same type all copy options are available. Has a mix
of log types been selected copying of the Main Settings is not possible.