WellCAD Basics - Advanced Logic Technology

Tadpole:
Structure Tadpole style settings dialog box
APPENDIX A - 397
When displaying structural data in Tadpole style you can set a low and high scale
value for the dip angle and whether the data is displayed on a linear or sinus scale.
The latter one "stretches" the vertical grid line spacing closer to low dips and
"squeezes" the grid line spacing towards high dip (equivalent to a logarithmic grid
used with wireline curves). Usually the values are set from 0 to 90 degree. If the
vertical gird lines are displayed, the Grid box shows the frequency with which the
major and minor grid will be displayed. Click on Settings to change the grid style.
Slab Core:
Structure Slab Core style settings dialog box