WellCAD Basics - Advanced Logic Technology

More documents

Recommendations

Info

366 - APPENDIX A www.alt.lu Conversion to other log types: It is possible to convert RGB Log traces into Well Logs or to create a new Image Log from the RGB information. Converting an RGB Log to Well Logs: RGB Log to Well Log conversion From the Edit menu select the Convert Log To > Well Log option and set a starting point and increment in the dialog box that opens. Each RGB Log trace at the position given through Starting point and Increment will be converted into a Well Log. The values set as data are the total color amplitude values calculated from the RGB intensity: A total � R 2 � G 2 � B Converting an RGB Log into an Image Log: From the Edit menu select the Convert Log To option. Select the type of Image Log you would like to create – integer, float 2 or float 4. The next dialog box asks you whether you want to convert all color intensities or only the Red, Green or Blue one. 2
RGB Log to Image Log conversion APPENDIX A - 367 The values set as data are the total color amplitude values calculated from the RGB intensity: Default Settings: A total � R 2 � G 2 � B The only default options that can be set are the position of the log and if the reference of the data display is the left or right track border. All parameter were already explained in the Main Settings. 2
Page 1 and 2:
4.4 Book 1 - Basics
Page 3 and 4:
Introduction ......................
Page 5 and 6:
Comment Log .......................
Page 7 and 8:
Introduction INTRODUCTION - I Licen
Page 9 and 10:
INTRODUCTION - III running a Flexne
Page 11 and 12:
Book 1 - WellCAD Basics BOOK 1 - WE
Page 13 and 14:
BOOK 1 - WELLCAD BASICS - 3 The Tit
Page 15 and 16:
1.2.1.1 Reader Module BOOK 1 - WELL
Page 17 and 18:
1.2.3 Draft, Presentation and Print
Page 19 and 20:
1.2.4.1 Switching between documents
Page 21 and 22:
BOOK 1 - WELLCAD BASICS - 11 Usuall
Page 23 and 24:
Display Styles: 1.3.1.3 Depth Colum
Page 25 and 26:
1.3.1.5 Marker Log Display Styles:
Page 27 and 28:
1.3.1.7 CoreDesc Log Display Styles
Page 29 and 30:
1.3.1.9 Strata Log Display Styles:
Page 31 and 32:
Data Format: BOOK 1 - WELLCAD BASIC
Page 33 and 34:
1.3.1.12 Full Wave Sonic Log Descri
Page 35 and 36:
BOOK 1 - WELLCAD BASICS - 25 1.3.1.
Page 37 and 38:
1.3.1.16 Analysis Log Display Style
Page 39 and 40:
1.3.1.18 Structure Log Display Styl
Page 41 and 42:
1.3.1.19 Breakout Log Description:
Page 43 and 44:
1.3.1.21 Engineering Log Descriptio
Page 45 and 46:
1.3.1.23 Polar & Rose Log Descripti
Page 47 and 48:
1.3.1.25 3D Log Display Styles: Des
Page 49 and 50:
BOOK 1 - WELLCAD BASICS - 39 An alt
Page 51 and 52:
1.3.2.3 Naming Logs Right click on
Page 53 and 54:
Tick to enable snap to specified mu
Page 55 and 56:
To display the Document Layout Bar:
Page 57 and 58:
After aligning logs side-by-side In
Page 59 and 60:
BOOK 1 - WELLCAD BASICS - 49 Log wi
Page 61 and 62:
1.3.2.7 Depth Shifting Logs BOOK 1
Page 63 and 64:
1.3.2.9 Extending Logs 1.3.2.10 Cut
Page 65 and 66:
BOOK 1 - WELLCAD BASICS - 55 � Pr
Page 67 and 68:
1.3.2.13 Comparing Log Data - The T
Page 69 and 70:
1.3.2.15 Find and Replace data BOOK
Page 71 and 72:
BOOK 1 - WELLCAD BASICS - 61 Check
Page 73 and 74:
General settings: Check to hide the
Page 75 and 76:
1.3.3.2 Main Settings Background: B
Page 77 and 78:
BOOK 1 - WELLCAD BASICS - 67 Or �
Page 79 and 80:
1.3.3.4 Copy Settings between Logs
Page 81 and 82:
1.4 Basic Document Editing 1.4.1 De
Page 83 and 84:
BOOK 1 - WELLCAD BASICS - 73 Note:
Page 85 and 86:
BOOK 1 - WELLCAD BASICS - 75 measur
Page 87 and 88:
1.4.2 Data Import BOOK 1 - WELLCAD
Page 89 and 90:
To use an alias table during import
Page 91 and 92:
BOOK 1 - WELLCAD BASICS - 81 Use Al
Page 93 and 94:
List of data channels contained in
Page 95 and 96:
BOOK 1 - WELLCAD BASICS - 85 Previe
Page 97 and 98:
BOOK 1 - WELLCAD BASICS - 87 repres
Page 99 and 100:
Click to select the channels to imp
Page 101 and 102:
BOOK 1 - WELLCAD BASICS - 91 config
Page 103 and 104:
Preview of the embedded configurati
Page 105 and 106:
Selected Files: BOOK 1 - WELLCAD BA
Page 107 and 108:
BOOK 1 - WELLCAD BASICS - 97 The DL
Page 109 and 110:
BOOK 1 - WELLCAD BASICS - 99 WellCA
Page 111 and 112:
BOOK 1 - WELLCAD BASICS - 101 The d
Page 113 and 114:
Switch between header and trailer s
Page 115 and 116:
Empty dynamic text fields Interacti
Page 117 and 118:
BOOK 1 - WELLCAD BASICS - 107 Dialo
Page 119 and 120:
BOOK 1 - WELLCAD BASICS - 109 1.4.4
Page 121 and 122:
Enabled when data overlap must be h
Page 123 and 124:
BOOK 1 - WELLCAD BASICS - 113 Gamma
Page 125 and 126:
1.4.5 Data Export BOOK 1 - WELLCAD
Page 127 and 128:
1.4.5.2 Generating a LAS File BOOK
Page 129 and 130:
BOOK 1 - WELLCAD BASICS - 119 � S
Page 131 and 132:
1.4.6.2 Page Setup BOOK 1 - WELLCAD
Page 133 and 134:
1.4.6.3 Print Preview and Print BOO
Page 135 and 136:
BOOK 1 - WELLCAD BASICS - 125 Const
Page 137 and 138:
Formula for Vsh BOOK 1 - WELLCAD BA
Page 139 and 140:
Code recorded as data, it refers to
Page 141 and 142:
BOOK 1 - WELLCAD BASICS - 131 Examp
Page 143 and 144:
BOOK 1 - WELLCAD BASICS - 133 Conta
Page 145 and 146:
1.5.5 Setting up Classifications BO
Page 147 and 148:
BOOK 1 - WELLCAD BASICS - 137 The f
Page 149 and 150:
BOOK 1 - WELLCAD BASICS - 139 Dialo
Page 151 and 152:
BOOK 1 - WELLCAD BASICS - 141 Litho
Page 153 and 154:
BOOK 1 - WELLCAD BASICS - 143 If We
Page 155 and 156:
1.5.11 Correcting Data for Borehole
Page 157 and 158:
Note: 1.5.12.1 Azimuth and Tilt BOO
Page 159 and 160:
1.5.12.2 Easting, Northing and TVD
Page 161 and 162:
Balanced Tangential: Coordinates of
Page 163 and 164:
BOOK 1 - WELLCAD BASICS - 153 Input
Page 165 and 166:
1.5.13.3 Drift Correction Spectrum
Page 167 and 168:
BOOK 1 - WELLCAD BASICS - 157 Log:
Page 169 and 170:
1.5.13.7 Window Based Model BOOK 1
Page 171 and 172:
Remarks Tab Model Design Tab Window
Page 173 and 174:
BOOK 1 - WELLCAD BASICS - 163 The i
Page 175 and 176:
Log containing the measurements (sp
Page 177 and 178:
2 nd element (e.g. U): BOOK 1 - WEL
Page 179 and 180:
Where �WK � � C � � �
Page 181 and 182:
1.5.14 Hole Volume Calculation BOOK
Page 183 and 184:
Unit: BOOK 1 - WELLCAD BASICS - 173
Page 185 and 186:
Interval: Select a log dealing with
Page 187 and 188:
Inserting intervals: After selectin
Page 189 and 190:
To display the Annotation Bar: �
Page 191 and 192:
Begin is where you clicked to draw
Page 193 and 194:
1.6.1.3 Callout Annotation BOOK 1 -
Page 195 and 196:
List of existing layers Click to al
Page 197 and 198:
1.7.1.2 Creating Anchor Points Link
Page 199 and 200:
Common link lines and their effect
Page 201 and 202:
BOOK 1 - WELLCAD BASICS - 191 If yo
Page 203 and 204:
BOOK 1 - WELLCAD BASICS - 193 Tilt
Page 205 and 206:
Select the depth reference that cor
Page 207 and 208:
BOOK 1 - WELLCAD BASICS - 197 Step
Page 209 and 210:
BOOK 1 - WELLCAD BASICS - 199 The m
Page 211 and 212:
BOOK 1 - WELLCAD BASICS - 201 Date/
Page 213 and 214:
BOOK 1 - WELLCAD BASICS - 203 Orien
Page 215 and 216:
BOOK 1 - WELLCAD BASICS - 205 Cross
Page 217 and 218:
1.8.1.2 Chart Settings Chart Title
Page 219 and 220:
1.8.1.4 Depth Range Selection BOOK
Page 221 and 222:
1.8.2.2 Log Overview Axis Settings
Page 223 and 224:
BOOK 1 - WELLCAD BASICS - 213 Highl
Page 225 and 226:
1.8.2.3 Cluster Statistics 1.8.3 Bu
Page 227 and 228:
Creating a Cluster � Move your cu
Page 229 and 230:
1.8.4 Adding Regression 1.8.4.1 Reg
Page 231 and 232:
1.8.4.2 Regression Data Source 1.8.
Page 233 and 234:
BOOK 1 - WELLCAD BASICS - 223 Right
Page 235 and 236:
Annotation Clusters Legend Plot Leg
Page 237 and 238:
Plot Legend BOOK 1 - WELLCAD BASICS
Page 239 and 240:
1.8.5.2 Inserting Annotations BOOK
Page 241 and 242:
Appendix A APPENDIX A - 231 The fol
Page 243 and 244:
Display Styles: Well Log data is al
Page 245 and 246:
APPENDIX A - 235 Scale: The horizon
Page 247 and 248:
Select the presentation style for e
Page 249 and 250:
Classification: APPENDIX A - 239 Cl
Page 251 and 252:
APPENDIX A - 241 Copy: Copies the d
Page 253 and 254:
Mud Log Description: APPENDIX A - 2
Page 255 and 256:
Page 257 and 258:
APPENDIX A - 247 polarity positive
Page 259 and 260:
APPENDIX A - 249 correct depth. A c
Page 261 and 262:
Editing Methods: APPENDIX A - 251 T
Page 263 and 264:
Shift by: Performs a constant depth
Page 265 and 266:
APPENDIX A - 255 Mud Log to Litho L
Page 267 and 268:
� Open the Edit > Insert New Log
Page 269 and 270:
APPENDIX A - 259 Position: The dept
Page 271 and 272:
APPENDIX A - 261 Items Count: For e
Page 273 and 274:
APPENDIX A - 263 Cut: Copies the da
Page 275 and 276:
Interval Log Description: APPENDIX
Page 277 and 278:
Page 279 and 280:
Classified Bar: Classified Bar styl
Page 281 and 282:
APPENDIX A - 271 In some cases it m
Page 283 and 284:
APPENDIX A - 273 Inserting data:
Page 285 and 286:
Conversion to other log types: APPE
Page 287 and 288:
Comment Log Description: APPENDIX A
Page 289 and 290:
Format: APPENDIX A - 279 From left
Page 291 and 292:
Editing Methods: APPENDIX A - 281 C
Page 293 and 294:
APPENDIX A - 283 The following opti
Page 295 and 296:
APPENDIX A - 285 Defaults can be se
Page 297 and 298:
Inserting a new Marker Log: APPENDI
Page 299 and 300:
Name Dictionary: APPENDIX A - 289 T
Page 301 and 302:
Flying Menu: Settings: Get access t
Page 303 and 304:
CoreDesc Log Description: APPENDIX
Page 305 and 306:
Main Settings: Title: Core Descript
Page 307 and 308:
Background hidden (right) to enhanc
Page 309 and 310:
To re-position the entire interval:
Page 311 and 312:
APPENDIX A - 301 When sorting is pe
Page 313 and 314:
Lithology Log Description: APPENDIX
Page 315 and 316:
APPENDIX A - 305 WellCAD. LTH libra
Page 317 and 318:
Primary: Bed limits and contact lin
Page 319 and 320:
Select a pattern that will be used
Page 321 and 322:
Litho Bar attached to WellCAD Works
Page 323 and 324:
Delete: Removes the log and its dat
Page 325 and 326: Pattern Dictionary: Lithology Log d
Page 327 and 328: Display Styles: APPENDIX A - 317 St
Page 329 and 330: APPENDIX A - 319 Column Settings: T
Page 331 and 332: APPENDIX A - 321 Left: Strata colum
Page 333 and 334: Box Style set to Center, Left, Righ
Page 335 and 336: Inserting Data: Click to insert fre
Page 337 and 338: APPENDIX A - 327 The following opti
Page 339 and 340: Stacking Pattern Log Description: A
Page 341 and 342: APPENDIX A - 331 Title: Enter the t
Page 343 and 344: APPENDIX A - 333 Changing top and b
Page 345 and 346: Conversion of stacking pattern inte
Page 347 and 348: OLE Log Description: APPENDIX A - 3
Page 349 and 350: Tool Bar and Menu Bar from EXCEL Ne
Page 351 and 352: Main Settings: Title: OLE Log Setti
Page 353 and 354: Slice at: Splits the data set into
Page 355 and 356: Inserting a new FWS Log: APPENDIX A
Page 357 and 358: APPENDIX A - 347 upper and lower pa
Page 359 and 360: Default Settings: APPENDIX A - 349
Page 361 and 362: Inserting a new VSP Log: APPENDIX A
Page 363 and 364: Editing Methods: APPENDIX A - 353 V
Page 365 and 366: APPENDIX A - 355 Image Log / Image
Page 367 and 368: Main Settings: Title: Select the We
Page 369 and 370: APPENDIX A - 359 The Shifted Curve
Page 371 and 372: APPENDIX A - 361 Copy: Copies the d
Page 373 and 374: RGB Log Description: APPENDIX A - 3
Page 375: Flying Menu: RGB Log Flying Menu AP
Page 379 and 380: APPENDIX A - 369 Line style: Data p
Page 381 and 382: Style: APPENDIX A - 371 The Analysi
Page 383 and 384: APPENDIX A - 373 Clicking the Advan
Page 385 and 386: APPENDIX A - 375 Adjust the depth r
Page 387 and 388: APPENDIX A - 377 Continue inserting
Page 391 and 392: Main Settings: Title: Percentage Lo
Page 393 and 394: Line Style: Line style APPENDIX A -
Page 395 and 396: APPENDIX A - 385 The Analysis Compo
Page 397 and 398: Flying Menu: Percentage Log Flying
Page 399 and 400: APPENDIX A - 389 The default patter
Page 401 and 402: W S N E APPENDIX A - 391 N E S W N
Page 403 and 404: Additional Attributes: APPENDIX A -
Page 405 and 406: Caliper button: Structure Log in Pr
Page 407 and 408: Tadpole: Structure Tadpole style se
Page 409 and 410: Editing Methods: APPENDIX A - 399 N
Page 411 and 412: APPENDIX A - 401 sine wave that wil
Page 413 and 414: APPENDIX A - 403 Clear Contents: Er
Page 415 and 416: Breakout Log Description: APPENDIX
Page 417 and 418: Title: APPENDIX A - 407 Enter the t
Page 419 and 420: Breakout projection style settings
Page 421 and 422: To delete a breakout pick: � Sele
Page 425 and 426: Inserting a new Bio Log: APPENDIX A
Page 427 and 428:
APPENDIX A - 417 Position: You can
Page 429 and 430:
APPENDIX A - 419 When opening the H
Page 431 and 432:
APPENDIX A - 421 Style: If the Disp
Page 433 and 434:
Flying Menu: Bio Log Flying Menu AP
Page 435 and 436:
Engineering Log Description: APPEND
Page 437 and 438:
Display Styles: APPENDIX A - 427 En
Page 439 and 440:
Full, Left and Right display styles
Page 441 and 442:
Drill Item Example of a log with th
Page 443 and 444:
Flying Menu: Engineering Log Flying
Page 445 and 446:
Shading Log Description: APPENDIX A
Page 447 and 448:
APPENDIX A - 437 Copy: Copies the d
Page 449 and 450:
Inserting A New 3D Log: APPENDIX A
Page 451 and 452:
Title: APPENDIX A - 441 Enter the t
Page 453 and 454:
Frame: APPENDIX A - 443 If no Frame
Page 455 and 456:
APPENDIX A - 445 Select the log tha
Page 457:
Default Settings: APPENDIX A - 447
Page 460 and 461:
450 - APPENDIX A www.alt.lu Breakou
Page 462 and 463:
452 - APPENDIX A www.alt.lu Box: Po
Page 464 and 465:
454 - APPENDIX A www.alt.lu Rose Di
Page 466 and 467:
456 - APPENDIX A www.alt.lu Mean Di
Page 468 and 469:
458 - APPENDIX A www.alt.lu For pur
Page 470 and 471:
460 - APPENDIX A www.alt.lu Grid: Y
Page 472 and 473:
462 - APPENDIX A www.alt.lu Rose Az
Page 474 and 475:
464 - APPENDIX A www.alt.lu Concent
Page 476 and 477:
466 - APPENDIX A www.alt.lu Vector
Page 478 and 479:
468 - APPENDIX A www.alt.lu Rose Di
Page 480 and 481:
470 - APPENDIX A www.alt.lu As the
Page 482 and 483:
472 - APPENDIX A www.alt.lu Editing
Page 484 and 485:
474 - APPENDIX A www.alt.lu Fill: A
Page 486 and 487:
476 - APPENDIX A Cross Section Log
Page 488 and 489:
478 - APPENDIX A www.alt.lu Data dr
Page 490 and 491:
480 - APPENDIX A www.alt.lu extensi
Page 492 and 493:
482 - APPENDIX A www.alt.lu � Cli
Page 494 and 495:
484 - APPENDIX A www.alt.lu Default
Page 496 and 497:
486 - APPENDIX B Tool Bar www.alt.l
Page 498 and 499:
488 - APPENDIX B www.alt.lu Toggle
Page 500 and 501:
490 - APPENDIX B Pen Bar www.alt.lu
Page 502 and 503:
492 - APPENDIX B Document Layout Ba
Page 505 and 506:
Appendix C Listed are all functions
Page 507 and 508:
Power( A, P ) Returns argument (A)
Page 509 and 510:
Index 3 3D Log · 37, 438 3D Log Ma
Page 511 and 512:
Deleting Logs · 39 Depth Axis · 7
Page 513 and 514:
Marker position · 148 Mask horizon
Page 515:
Structure Log Editing · 399 Struct
show all

WellCAD Basics - Advanced Logic Technology

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?