WellCAD Basics - Advanced Logic Technology

436 - APPENDIX A
www.alt.lu
Title:
Enter the title that identifies the log. The title will be displayed in the Title area of
the log handle.
Position:
You can set the left and right position of the log column in selected units. The
default unit displayed is the one set for the Ruler Bar (see 1.3.2.4 Positioning Logs).
Borders:
You have to define the left and right border of the shaded region. As the left or right
limit the log column border, the values of a log listed in the drop down control or a
constant value typed into the control can be used. At least one of the borders must
be a log. It is recommended that the Shading Log and the log defining the shading
border be of the same width.
Shading Color:
Select the color that will be used as solid shading color.
Flying Menu:
Shading Log Flying Menu
The following options are available:
Settings:
Get access to Base, Main and Title Settings of the log.
Editor:
Opens the tabular editor of the log.
Cut:
Copies the data to the clipboard and removes the data set from the borehole
document. The log(s) used as shading border are copied as well.