WellCAD Basics - Advanced Logic Technology

Creating a Cluster
� Move your cursor to the cross-plot chart.
BOOK 1 - WELLCAD BASICS - 217
� While holding down the SHIFT key click with the left mouse button to set
points of a polygon encircling the points you wish to cluster.
� After setting the last point release the SHIFT key and move the mouse to
automatically close the cluster frame.
Insert a cluster by holding down the SHIFT key and clicking to set the edge points of a polygon
For each cluster a new row will be added to the Cluster Bar (see 1.8.2.3 Cluster
Statistics).
To assign a color or pattern fill to the cluster (a
litho dictionary must already be loaded; open the
Cluster Settings to load a dictionary) double click
into the new cluster frame or right click and choose
Cluster Settings. Assign a name and choose
from a solid color fill or assign a pattern.
To delete a cluster, simply hold down the CTRL key and click into the
corresponding cluster or right click on the corresponding row in the Cluster Bar and
choose the Delete option.