WellCAD Basics - Advanced Logic Technology

Style:
APPENDIX A - 371
The Analysis Log can present its data in three different styles – Dynamic Bar,
Fixed Bar and Line. For all display styles you can choose whether you want to
show lines separating the components from each other or not. Check the Display
Border Lines option if you want to see them.
Dynamic Bar:
Dynamic Bar style
The upper and lower limits of adjacent data points are linked together to form a
continuous dynamic bar. Please have a look to the Advanced settings to know if the
data points depth belongs to the top, middle or bottom of the bar.
Depending on your sample rate and document depth scale the bars appear as very
small lines only.
Fixed Bar:
Fixed Bar style
Each data point is displayed as a fixed discrete bar. The thickness of the bar can be
defined and may be changed from 0.1 to 5.0 mm thickness by entering the
corresponding value (measured in mm/10) into the edit box. Please have a look to